Installed my new backrest and added a little bling to the top of my bags. I flipped direction they pointed several times and finally decided on what you see.

 

I like the way those badges look on the saddlebags. Nice!

 

Picked up this 14 Switchback 2 weeks ago. Installed the Arlen Ness ac and the Bassani Road Rage exhaust today. Tuner arrives tomorrow…👍

 

Delete

 

I didn’t want to drill and tap my new Fuel Moto AC/DC air cleaner backing plate for an external breather, so I used the factory breather bolts. This way, with the solid breather bolts, I don’t need to fill the internal ports with rtv. Doing it like this keeps the base as it came from FM, just in case it needed to be returned to a stock breather setup down the road. Not everyone will be pleased with the aesthetics of an EBS mod done this way, but I like it.

M5 German fuel line fits the breather bolts snuggly, coupled with Oetiker clamps assure they won’t pop off. I had the hose on hand, but 5mm hose is easy to source……https://belmetric.com/m5x11-smooth-f...uel-hose-rhm5/.
3/16” hose is a little smaller than 5mm and would be difficult to get on the fitting, but could probably work, and 1/4” is just a little too big.

Tee to breather filter is just a plastic push on barbed windshield washer hose fitting. I might pony up for a better looking filter or maybe even a catch can later on, but I have it all tucked away under the air filter base and it’s really isn’t seen.

 

Good job, I need to do the same thing to mine. I think I am goin to take an angle grinder and cut the ears off the backing plate to install a different type of breather system.

 

With the backing plate being billet on these and not the cheaper thin stamped steel, that ought to work out ok?

 

New Halo headlight, 3 hole oil change and filter, adjusted the clutch, and got my broken fork lock out of the frame.

 

Screaming Eagle 10mm wires.

 

I finally pulled the trigger on pullback risers.