What did you do to your Dyna today?
The following 3 users liked this post by Tileman2692:
Swapped stock turn signals for MoonsMC Moonpods V2 LED signals:
Put it on the Dyno, learned it is bone stock 75HP 96 ft lbs torque:
Put it on the Dyno, learned it is bone stock 75HP 96 ft lbs torque:
The following users liked this post:
Garage Queen Rescue (03-13-2022)
100mi tour around no where, then grabbed some brake fluid on my way home and changed out the original fluid. Black and nasty, had a little metallic paste in it which is a tad concerning. But I took the line off the caliper and flushed it.
The following users liked this post:
Garage Queen Rescue (03-21-2022)
The following 2 users liked this post by multihdrdr:
2500hdon37s (03-22-2022),
Garage Queen Rescue (03-21-2022)
I pulled the cam cover on the '02 after 2,000 miles since buying it, to see if 20 y.o. tensioners wear faster than new ones. (They don't.)
24,000 miles and still plenty of meat on them with no cracking.
24,000 miles and still plenty of meat on them with no cracking.
The following users liked this post:
Garage Queen Rescue (03-21-2022)
20 years old....time to change
The following 3 users liked this post by Blue Bob:
New cams arrived! Still waiting on tappets/ rollers to show. Fueling 543’s, research says these should fit what I want out of it the most. Bought from fuel moto with push rods and install kit as they had a nice discount code going for St. Patrick’s day.
The following 2 users liked this post by 2500hdon37s:
Dynawobble (04-11-2022),
Garage Queen Rescue (03-23-2022)
Threw on the solo seat to go for a ride, and the (I'm guessing original) petcock is dumping fuel on the rear cylinder. Drained the tank, changed the line going to the carb, ordered a Pingel non-vacuum unit to replace the stock piece. Now I wait - the worst part...lol