What did you do to your Dyna today?
black is oem I would imagine...still debating that mod for mine. I bought new grips ....who knows where they are? lol I bought 'em a few years ago and were put on a shelf......somewhere....
Hello,
Today chrome cleaning ritual for my 2011 Dyna street bob (new 2 small rust spots appears need more work...)
Today chrome cleaning ritual for my 2011 Dyna street bob (new 2 small rust spots appears need more work...)
The following users liked this post:
Garage Queen Rescue (12-04-2021)
The following users liked this post:
Garage Queen Rescue (12-04-2021)
Holy smokes that's crowded, I have my coil in that space and I still have room! You can make more space though and make it easy to get stuff in and out. One thing you can do is take out the battery and then remove the battery box you can saw/grind off those three nub things that stick out of the backside of the battery box.
Good stuff from CD
Good stuff from CD
There wasn't much room to work with under the seat and the existing wires were tight with no slack. I added:
- Long blue stabilizer
- Two sets of large connectors. One is a piggyback for the stabilizer and the other is a piggyback for the rear light
- One set of small connectors that feed the rear light
- Wire harnesses for the stabilizer and rear light
The following 3 users liked this post by rbartick:
The following 3 users liked this post by HildasRevenge:
The following users liked this post:
HildasRevenge (12-19-2021)
The following 4 users liked this post by diablos:
Carl '69 (12-18-2021),
Garage Queen Rescue (12-18-2021),
mpiersd (12-18-2021),
robarosa (12-21-2021)
Cleaned 6 years of hardened sludge and varnish out of what was at first glance thought to be a lost cause gas tank on my wife's new garage find dyna.
First photo was actually after my first pass with a plastic putty knife and some sea foam deep creep. After that I was hitting it with heavy duty carb cleaner and watching it sheet off.
still needs one more pass to be acceptable in my eyes
First photo was actually after my first pass with a plastic putty knife and some sea foam deep creep. After that I was hitting it with heavy duty carb cleaner and watching it sheet off.
still needs one more pass to be acceptable in my eyes
The following 2 users liked this post by mpiersd:
Garage Queen Rescue (12-18-2021),
SW CQB 45 (12-18-2021)