What did you do to your Dyna today?
Installed a TSSM and alarm siren that I got off of various salvaged bikes on eBay. TSport only had a TSM before. Nothing exciting but a little more peace of mind.
The following users liked this post:
1Dyna03 (04-11-2021)
I installed a new Barnett extra clutch disk pack set, I did not use the Barnett spring plate in the kit, I purchased and used the Energy One 10% stronger option.
I had changed the clutch cable at the end of the season last year.
All good and filled with Amsoil SuperShift ATF comparable to Type" F" ATF. No slipping, smooth shifting. I reused the gaskets with no leaks and works great.
I had changed the clutch cable at the end of the season last year.
All good and filled with Amsoil SuperShift ATF comparable to Type" F" ATF. No slipping, smooth shifting. I reused the gaskets with no leaks and works great.
The following users liked this post:
Jerry311 (04-16-2021)
Originally Posted by multihdrdr
Is it a Done Deal with the ebay guy? ... (which I think i know who it is)?
The following users liked this post:
1Dyna03 (04-11-2021)
The following 2 users liked this post by Jerry311:
Garage Queen Rescue (04-16-2021),
underwhelmd (04-15-2021)
When I installed the batwing fairing, it covered the front signals on the bars. I bought Custom Dynamics truWraps led lights to solve that. They come with the modules to use them as Run/Turn instead of just run OR turn.
They are very bright. The instructions are good. Bit of a pain to install but I'm happy with the results.
They are very bright. The instructions are good. Bit of a pain to install but I'm happy with the results.
The following users liked this post:
Garage Queen Rescue (04-16-2021)
Got a few things done in the last couple nights. Ran the wiring through the bars, replaced a broken spoke on my front wheel, ordered (hopefully) the last of the parts I need to finish my dual front brake conversion, and put a coat of body filler on my rear fender. I've got a little more work to do on the fender before its ready for paint, but hopefully that will happen next week. I also finalized my decision on what color its going to be, been going back and forth between the black pearl it was previously and a couple different blues. I settled on a new '21 Ford color, Antimatter Blue, which I think should look pretty cool. Tons of details to wrap up, but I hope to be riding it by mid May.
The following 3 users liked this post by Reindeer:
Got my front motor mount swapped out and flushed brake fluid in the front and back.
Last edited by slippin_jimmy; 04-16-2021 at 10:25 AM.
With a 2006 I imagine I can wait for a motor mount swap.....first thing I did when I got the bike , flush the brake fluid......do it every 3rd oil change.......unchecked and the fluid does more damage than having no brakes......well maybe thats a bit much....
The following users liked this post:
slippin_jimmy (04-16-2021)