Got fed up with killing incandescent taillight bulbs... finally bit the bullet and bought Custom dynamics. Couldnt leave the front alone either, Went ahead and got the dynamic ringz switch back front turn signals. They match the daymaker head light nicely, which is what I really wanted. + the winter time windshield is on.
rears-
Attachment 524294

front running lights-
Attachment 524295

front with left turn signal on (caught mid flash)-
Attachment 524296

 

Purdy garage doors.

What's the part # on that shield you're sporting?

 

Pushed my bike outside and took some pictures of my add ons. In the last while I added the Screamin Eagle intake, Pro Pipe, and Lepera Maverick seat. As shown on the last page I stripped the bike down and polished the paint using three steps of polishing compound followed by a coat of carnuba wax.


Attachment 524284
Attachment 524285
Attachment 524286
Attachment 524287
Attachment 524288
Attachment 524289
Attachment 524290

 

I hate his thing

 

Very tastefully done, my man. I believe the icing on the cake for this bike would be a pair of Leatherpro FXDXT Retro saddle bags.
http://leatherpros.com/website1_003.htm

 

Thanks, I have a set of HD detachable bags that I use on trips. If you look in some of the pictures you can see the chrome covers hiding the quick attach mounts for the bags.

 

Haha the old doors were beat and got up graded this summer, and I got a little fob thats easy to use from the bike so I can wheel right in... Wood trim/ pillars around the garage doors is suppose to get painted to match some time!

Windshield is a Memphis Shades slim 17in PN- MEM4210 With the appropriate mounting hardware, also I run the memphis so I can switch back to the Memphis cafe fairing in seconds.

 

Fitted a smaller licence plate. Even still it is the size of a small country.

 

You had me laughing at that one.

 

Our standard plates are 9x7" can you imagine having that thing stuck on your bike? I went 8x6" and I think I'm soon going to ditch that for a 7x5"