Doing an update on 3rd bracket, this one is holding up. got one of the ones that broke off welded an L iron. License plate all banged up from the times they've broke off. It takes a beating on that lower shock bolt.

 

New Sissy bar. Modified the plates so it’s “quick-er” detach.

 

Changed all 3 holes and installed a new AGM battery. Now I'm ready for Daytona this coming week end

 

Adjusted the highway pegs and did about 150 miles

 

Started on my hydraulic clutch conversion today. Also did three hole fluid change and normal service. Decided to order some Diamond Engineering stainless 12pt banjo bolts while I wait for my black Oberon Airo lever to come in.

 

While you are waiting, that couch could use reupholstering. Bet you've heard that from the SO before... tp

 

Hey, would you mind posting up part numbers and manufacturers for the conversion parts?

And I sure hope that's oil under your bike and not Red Breast! That would be alcohol abuse!

 

Haaa ! , Me too .

 

Usually just throw a blanket over it. The pups control it and watch their TV from it!

 

All good! It’s just tranny fluid. I’d have licked it up if it was Redbreast!!

As far as parts:

Boosted Brad’s hydraulic clutch cover http://boostedbrad.com/Death-Metal-R...tch-cover.html

Harley Davidson clutch master cylinder https://shop.newcastlehd.com/part/36700056c

Magnum Shielding ABS DOT brake line with AN female fittings. I have 13.5” rise on my bars and went with 76” black pearl to match my other line https://www.magnumshielding.com/Brak...rsalBrakeLines

Magnum Shielding 35° and 90° fittings https://www.magnumshielding.com/Brak.../banjofittings

Magnum Shielding Crush washers https://www.magnumshielding.com/BYO-392910?search=Crush

Diamond Engineering banjo bolts https://www.denniskirk.com/diamond-e...SABEgKjCvD_BwE

Motul RBF600 DOT 4 brake fluid https://www.motul.com/us/en-US/produ...0-factory-line