124" winter build...
#52
Don't remember any sticky stuff.
Last edited by HD Pilot; 01-16-2015 at 07:36 PM.
#54
Cake. Kirby used stock 110 heads and worked them for my goals. They came with acr's. I wired them directly to the starter solenoid wire. 3000 miles and no issues. I could have bought the harness for them and witted them into the ECU but there are so many parramiters for the computer to make them function correctly that if I have an issue down the road it might be a pain so I wired them directly like Kirby suggested and they work fine.
#58
Which IR gun is that? Using 3/8" hoses/couplings or 1/4" and how big of a tank for the compressor?
Hopefully you don't have the same issues I did using the pulley locking tool to tighten the nut down. There was nowhere to rest it properly.
Hire a buddy to take pics of the re-assemble of the motor. Lots of us like to see that kind of stuff.
Hopefully you don't have the same issues I did using the pulley locking tool to tighten the nut down. There was nowhere to rest it properly.
Hire a buddy to take pics of the re-assemble of the motor. Lots of us like to see that kind of stuff.
#59
Which IR gun is that? Using 3/8" hoses/couplings or 1/4" and how big of a tank for the compressor?
Hopefully you don't have the same issues I did using the pulley locking tool to tighten the nut down. There was nowhere to rest it properly.
Hire a buddy to take pics of the re-assemble of the motor. Lots of us like to see that kind of stuff.
Hopefully you don't have the same issues I did using the pulley locking tool to tighten the nut down. There was nowhere to rest it properly.
Hire a buddy to take pics of the re-assemble of the motor. Lots of us like to see that kind of stuff.