superglide drag bars
#11
RE: superglide drag bars
Here is mine with the Wild Ones bars(560)ALso shown with a tank lift in place.The only thing I am going to look at doing is lowering it a bit with new suspension.
[IMG]local://upfiles/5368/59F4ABD0D10F45C59CAB7AC12BFD6AE8.jpg[/IMG]
[IMG]local://upfiles/5368/7CC8816651044792A5D3FD8D3EA68043.jpg[/IMG]
[IMG]local://upfiles/5368/59F4ABD0D10F45C59CAB7AC12BFD6AE8.jpg[/IMG]
[IMG]local://upfiles/5368/7CC8816651044792A5D3FD8D3EA68043.jpg[/IMG]
#12
RE: superglide drag bars
Those last 2 look outstanding, DGlide04 and Bronk. I also ditched the stock SG barsbut Iput Low Rider on mine. You 2 guys have the exact setup I'm trying to accomplish, just didnt know it could be done like that. I pm'd DGlide, but if anyone has info on how thats done (parts wise) please let me know. I'd greatly appreciate it!!
#13
RE: superglide drag bars
http://www.accutronix.com/products/risers/R1.shtml
Bottom of the page will show you pics of the Tbar adapter you need.Then yuou need a pre 95 speedo mount for SG.This will mount to the adapter from accutronix,and you will also be able to put in the idiot lights.119 for the adapter and about 90 for the chrome speedo mount.Acts as a bit of a wind deflector as well.
Bottom of the page will show you pics of the Tbar adapter you need.Then yuou need a pre 95 speedo mount for SG.This will mount to the adapter from accutronix,and you will also be able to put in the idiot lights.119 for the adapter and about 90 for the chrome speedo mount.Acts as a bit of a wind deflector as well.
#14
RE: superglide drag bars
ORIGINAL: Rauzer
Those last 2 look outstanding, DGlide04 and Bronk. I also ditched the stock SG barsbut Iput Low Rider on mine. You 2 guys have the exact setup I'm trying to accomplish, just didnt know it could be done like that. I pm'd DGlide, but if anyone has info on how thats done (parts wise) please let me know. I'd greatly appreciate it!!
Those last 2 look outstanding, DGlide04 and Bronk. I also ditched the stock SG barsbut Iput Low Rider on mine. You 2 guys have the exact setup I'm trying to accomplish, just didnt know it could be done like that. I pm'd DGlide, but if anyone has info on how thats done (parts wise) please let me know. I'd greatly appreciate it!!
#15
RE: superglide drag bars
The gauge mount bracket is made by Accutronix, www.accutronix.com The bracket bolts between the 2 risers on the T-bars and the stock HD gauge mount attaches with the same two screws that attached it to the stock handlebar clamp. I went with the HD chromed dual gauge bracket #67294-95A along with the stock HD tachometer. I bought the tach as a single piece and then bought the Y harness to connect the speedo and tach to the stock wiring harness.
It is much cleaner and better looking since you don't have to cut and splice wiring. If you want the black dual gauge mount, it comes with the tach kit, but I didn't want the black mount so I bought all of the parts separately. If you need a list of parts and numbers, let me know and I'll post them here.
It is much cleaner and better looking since you don't have to cut and splice wiring. If you want the black dual gauge mount, it comes with the tach kit, but I didn't want the black mount so I bought all of the parts separately. If you need a list of parts and numbers, let me know and I'll post them here.
#16
RE: superglide drag bars
ORIGINAL: DGlide04
The gauge mount bracket is made by Accutronix, www.accutronix.com The bracket bolts between the 2 risers on the T-bars and the stock HD gauge mount attaches with the same two screws that attached it to the stock handlebar clamp. I went with the HD chromed dual gauge bracket #67294-95A along with the stock HD tachometer. I bought the tach as a single piece and then bought the Y harness to connect the speedo and tach to the stock wiring harness.
It is much cleaner and better looking since you don't have to cut and splice wiring. If you want the black dual gauge mount, it comes with the tach kit, but I didn't want the black mount so I bought all of the parts separately. If you need a list of parts and numbers, let me know and I'll post them here.
The gauge mount bracket is made by Accutronix, www.accutronix.com The bracket bolts between the 2 risers on the T-bars and the stock HD gauge mount attaches with the same two screws that attached it to the stock handlebar clamp. I went with the HD chromed dual gauge bracket #67294-95A along with the stock HD tachometer. I bought the tach as a single piece and then bought the Y harness to connect the speedo and tach to the stock wiring harness.
It is much cleaner and better looking since you don't have to cut and splice wiring. If you want the black dual gauge mount, it comes with the tach kit, but I didn't want the black mount so I bought all of the parts separately. If you need a list of parts and numbers, let me know and I'll post them here.
#17
#18
RE: superglide drag bars
ORIGINAL: Rauzer
I cant thank you enough for the info. If you have the other part numbers that would be great. I have the black speedo so I'd have to get the chrome speedo and tach. Did you need to get and different cables/wires than the stock ones? Maybe this would be better in pm's, hate to burn up this thread.
ORIGINAL: DGlide04
The gauge mount bracket is made by Accutronix, www.accutronix.com The bracket bolts between the 2 risers on the T-bars and the stock HD gauge mount attaches with the same two screws that attached it to the stock handlebar clamp. I went with the HD chromed dual gauge bracket #67294-95A along with the stock HD tachometer. I bought the tach as a single piece and then bought the Y harness to connect the speedo and tach to the stock wiring harness.
It is much cleaner and better looking since you don't have to cut and splice wiring. If you want the black dual gauge mount, it comes with the tach kit, but I didn't want the black mount so I bought all of the parts separately. If you need a list of parts and numbers, let me know and I'll post them here.
The gauge mount bracket is made by Accutronix, www.accutronix.com The bracket bolts between the 2 risers on the T-bars and the stock HD gauge mount attaches with the same two screws that attached it to the stock handlebar clamp. I went with the HD chromed dual gauge bracket #67294-95A along with the stock HD tachometer. I bought the tach as a single piece and then bought the Y harness to connect the speedo and tach to the stock wiring harness.
It is much cleaner and better looking since you don't have to cut and splice wiring. If you want the black dual gauge mount, it comes with the tach kit, but I didn't want the black mount so I bought all of the parts separately. If you need a list of parts and numbers, let me know and I'll post them here.
#19
RE: superglide drag bars
Bluegilde, here is the parts list I sent to Rauzer in my response to him:
Thanks, here is the part list I used for my upgrade, they were all bought from Zanotti's in Butler, PA, the prices I have are what I paid 2 years ago so they may have changed a bit:
Speedo/Tach Rear Cushion 67104-95 5.15
Speedo/Tach Front Cushion 67121-95 5.15
Y- wiring Harness 68850-04 83.40
Rear Cover/Bezel Kit 74541-00 7.16
Chrome Dual Bracket 67294-04A 81.00
Tachometer 68941-04 100.50
There may have been a couple of other small hardware items, but this is the best list I can put together w/o pulling dozens of receipts for the work done over the years. The more stuff you buy, the better a deal you can get on your shipping. The dual chrome bracket comes with the idiot light holes in it so it will accept the FXD/FXDX light set and the lights (see the attached) are included with the wiring harness, simple plug and go, no splicing, no hassle.
Gary
[IMG]local://upfiles/1981/9EF6A14502474177B1D9C2852F953E4F.jpg[/IMG]
[IMG]local://upfiles/1981/F8579726488C4CC2BEAD575D1F1C4432.jpg[/IMG]
Thanks, here is the part list I used for my upgrade, they were all bought from Zanotti's in Butler, PA, the prices I have are what I paid 2 years ago so they may have changed a bit:
Speedo/Tach Rear Cushion 67104-95 5.15
Speedo/Tach Front Cushion 67121-95 5.15
Y- wiring Harness 68850-04 83.40
Rear Cover/Bezel Kit 74541-00 7.16
Chrome Dual Bracket 67294-04A 81.00
Tachometer 68941-04 100.50
There may have been a couple of other small hardware items, but this is the best list I can put together w/o pulling dozens of receipts for the work done over the years. The more stuff you buy, the better a deal you can get on your shipping. The dual chrome bracket comes with the idiot light holes in it so it will accept the FXD/FXDX light set and the lights (see the attached) are included with the wiring harness, simple plug and go, no splicing, no hassle.
Gary
[IMG]local://upfiles/1981/9EF6A14502474177B1D9C2852F953E4F.jpg[/IMG]
[IMG]local://upfiles/1981/F8579726488C4CC2BEAD575D1F1C4432.jpg[/IMG]
#20