Just a pic of my new super d stack mounted to a 48 mikuni. Super D manifold with 1” spacer.

 

Beware ingesting small creatures and children!

 

Lot of carburetion for a Sporty.... Want to fill us in on the rest of the build?

 

77 C.I., 13.1-1 compression, 600hp cams with high lift rockers giving it 636 lift, worked 1200 rubber mount xl heads with 2.02 intakes, 2010 Buell xb crank/rods, 7800 redline. 48 takes 205-220 main jets with VPu4.4 fuel.

I do have a worked over super d, but it won’t hold rpm consistently enough while staging the bike. A handful of my friends are making the super d work great. they have a little bit different set ups than I do. I even tried one of their super d’s but no go. So mikuni 48 it is.

manifold is a super d ported by SA racing and 1” spacer with attachment block was made by Kevin benson racing.

 

I looked into some of the threads you created and that's quite the sporty.. 9.9's must be a great feeling. The most impressive thing to me about your build is that your torque is still really up there. A lot of the hammer kits I've seen the torque is not as pronounced as the horsepower is but going over 100 lb of torque with that is pretty goddamn good... Nice job....