mikuni hsr 42mm jetting questions
#1
mikuni hsr 42mm jetting questions
Hi wondering if anybody would have any clue one what jets I would need for my mikuni hsr 42mm the bike it will be going on is an 02 fxdx mostly stock. I do have a thunderheader exhaust, an arlen Ness stage 2 big sucker air filter and a dynatec 88tc ignition any help would be great as I would like it properly jetted on the initial install thanks in advance
#2
#3
[QUOTE=PeterV;15433350]#160-165 main
#20 pilot (don't go any bigger) two turns on the A/F screw
#50 acc pump, .080 accelerator I believe ump gap
Drop the needle as far as it can go (clip on top notch) and start from there, pick up a #98 needle, just in case you're still rich.[/
QUOTE]
Thanks for the reply I have the mikuni complete jet kit on its way which was prolly lil overboard but wanted to have everything I'd need. Do u know by any chance what # acc pump comes In it
#20 pilot (don't go any bigger) two turns on the A/F screw
#50 acc pump, .080 accelerator I believe ump gap
Drop the needle as far as it can go (clip on top notch) and start from there, pick up a #98 needle, just in case you're still rich.[/
QUOTE]
Thanks for the reply I have the mikuni complete jet kit on its way which was prolly lil overboard but wanted to have everything I'd need. Do u know by any chance what # acc pump comes In it
Last edited by fxdx-fxr-xlh; 08-20-2016 at 05:39 PM.
#4
Thread
Thread Starter
Forum
Replies
Last Post
OneHarleyAtATime
EVO
45
09-23-2021 07:56 AM
OneHarleyAtATime
Carburetor Related
4
06-11-2017 05:09 PM