Harley Davidson Forums

Harley Davidson Forums (https://www.hdforums.com/forum/)
-   Audio Systems (https://www.hdforums.com/forum/audio-systems-153/)
-   -   Powering multiple amps (https://www.hdforums.com/forum/audio-systems/993921-powering-multiple-amps.html)

Eshaw301 08-27-2014 09:32 AM


Originally Posted by UltraNutZ (Post 13148620)
reading your first post and then this post I sure in the hell hope you're not considering (4) PBR300x4 amps because that will be wasted $ and a futile effort.

Hell no! I was looking at four PBR300x2 amps. But like I said...that was just an idea. Im happy with what I have now but of course, i want to add lowers and put kappas in em too.

just plain john 08-27-2014 05:09 PM

So, back to my question. I haven't seen any type of distribution block, and I'm curious about how you would size the wire feeding it, and is the line side fused? Anyone got a link?

UltraNutZ 08-27-2014 05:17 PM


Originally Posted by just plain john (Post 13150523)
So, back to my question. I haven't seen any type of distribution block, and I'm curious about how you would size the wire feeding it, and is the line side fused? Anyone got a link?

me personally wouldn't put it in the fairing except for a last resort. I'd run a 4ga wire from the battery to the distribution block fused at the rating of devices connected combined and locate it somewhere close to the battery. Here's mine. It's located on the left side next to the fuse box. I also used a ground distribution block to mitigate all the crap connected to my battery. Can't see it that good but it's located on the right side under the side cover where the ABS module is located. Then make sure you fuse each device's power wire you connect to it according to the manufacturer's fuse ratings.

They come in MANY flavors.. pick your poison

http://www.sonicelectronix.com/cat_i...on-blocks.html

Gannicus 08-27-2014 05:53 PM


Originally Posted by just plain john (Post 13150523)
So, back to my question. I haven't seen any type of distribution block, and I'm curious about how you would size the wire feeding it, and is the line side fused? Anyone got a link?

Sorry for going off topic brother but I thought GP and ElGigante answered your question way back in post 7 & 8. Anyway I see Nutz has you covered as always!

just plain john 09-03-2014 06:51 AM

He's the man. Nice guy personally too.

acchd 09-03-2014 10:00 PM

Looking for somthing like this....
http://www.ebay.com/itm/290470453623...%3AMEBIDX%3AIT

ElGigante 09-04-2014 09:34 AM


Originally Posted by acchd (Post 13178300)


That's exactly what I run. I have 2 of them - one for ground and one for power

just plain john 09-05-2014 05:43 AM

Would running 3 amps fry the stator?

GLACIERPEARL 09-05-2014 05:59 AM

Depends on the amps.....I don't think I could run 3 of those Alpines, without upgrading something......I was going to run two batteries initially, but found I didn't need it....


All times are GMT -5. The time now is 11:36 PM.


© 2024 MH Sub I, LLC dba Internet Brands