Is there a video showing how to install this amp on a bike? The printed instructions are not clear at all.

 

which amp?

 

Go to Youtube and search for "Bagger Nation Amp Install".

Should come up with multiple videos on an aftermarket install.

 

The Rockford Fosgate PBR300x2 on a 2012 Ultra Classic

 

go to this link.
https://www.hdforums.com/forum/audio...tructions.html

use the first one. it's for a 2007 but the wiring is exactly the same. just substitute your speakers in place of the crossovers and polk speakers.

 

I guess what I actually need is to know what wires to connect where and so forth. I have the amp installed and power / ground wires ran but the actual wiring is what I need help with. The written instructions I have found are confusing and may as well be written in Arabic.

 

cut the RCA jacks off the amp input harness.
that leaves you a grey and grey/black wire and a white and white/black wire as your inputs

the speaker wires that are currently plugged into your stock speakers are
right (sitting on bike)
grey/red stock wire goes to the grey wire on the amp
black/green stock wire goes to the grey/black wire on the amp

left (sitting on bike)
white/brown stock wire goes to white wire on amp
white/green stock wire goes to the white/black wire on the amp

the output harness on the amp has the same color wires
grey/black goes to your new right speaker (sitting on bike) - terminal
grey goes to your new right speaker + terminal
white/black goes to your new left speaker (sitting on bike) - terminal
white goes to your new left speaker + terminal

 

Ultranutz,


Thanks for the reply. Satchmo and I finished this installation today (took several weeks to get back together) and followed your wiring instructions and it worked perfectly.


When we fired it up, it worked great, sounded great, and was just what he wanted!


Thanks again.


Rider718