+1 on the UUUUUgly......... since the fabric cover on my HogTunes setup is fading (looks blackish-brown now) and seeing the nice countersunk version available, I think its time for an upgrade.

 

 

For those who may have missed this information previously, HD's new "Boom Audio Custom Touring System," p/n 76000209 (list $1900) includes the CVO speaker boxes, wiring, etc. The installation instructions are useful for those doing just the CVO speakerboxes in vented lowers (HD doesn't offer a kit for this alone); see pages 8-9, and figs. 4 and 9:

http://www.harley-davidson.com/en_US...ts/-J05408.pdf

For whatever reason, HD says in the service parts list for this kit (p. 12, table 3, item 4) that the CVO speaker boxes are not available for separate sale. However, using the p/n's for the speaker boxes posted in this thread, you can, in fact, buy them--why HD doesn't provide the p/n's for the speaker boxes in this kit I have no idea--using the p/n's provided in this thread you can continue to buy them.

Carl

 

I have the Fosgate amp currently pushing 4 T152 Fosgate speakers; ordered the lower fairing boxes yesterday and gonna put Fosgate T1S652 speakers in and run them in series.

What's the worst that can happen?

 

you're going to run the T1S652's in series with each other? or in series with the other four speakers in your system???

 

I finally got around to installing the Vibe Audio Litebox Stereo 4 amp last night, it didn't fit in the Road Glide faring without some minor modifications...but it's in and working like a CHAMP!
I wired the rear speaker inputs a little different than Harlypingman, I pulled the rear right and left +/- speaker wires out of the non-Ultra overlay harness (since I'll never be using them for a tour pack) and ran them to the rear inputs on the Vibe Audio amp... it was way easier than replacing pins in the connector.

I have the J&M 7.25 speakers in the fairing and Infinity Kappa 63.9i 6-1/2" speakers in the lowers... getting the front/ rear fader activated in the HK radio is key to this install!
I haven't had a chance to take it out for a ride yet (raining here for the last two days) but it's loud as ***** in the garage at half volume!

Harlypingman,

thanks for your pics and info on doing this project!
it made my install all that much easier!

 

Run them in series with the other 4 speakers.

 

how are the other four speakers run to the amp??? is it a four channel amp??

 

Yep, 4 channel. It's a PBR300x4. All 4 Ohm; speakers and amp.

 

I'm confused, how are you going to run the new speakers in series with the other four?
the other four speakers are each running to one channel of the PBR300x4.