Hey Jester, did you unplug the HD Connect? Results? Thx

 

It's unplugged, but I wound up going further and rewiring everything. Speaker wire, power/ground, etc. so won't be putting the fairing back on until prob thursday. I'll know soon. Sorry....

 

I did the same with my bike. Ran new wiring and removed tanks to lay the power wire inside the plastic harness. Thanks again.

 

I am running my power and ground in the frame of the bike, not in the plastic tray. Too many other wires in there to run two 4awg cables.

 

Yea, I ran the power thru the harness and the negative to one of the 3 large bolts that hold the speaker cover that’s inside the fairing. It’s the top left bolt that’s a pain in the ***** to reach. I thought the harness was jammed also until I took it off, plenty of room. My 2017 had the channel in the frame but I didn’t see it on the 2020 SGS. Anyway, best of luck.

 

plenty of room in the tray. I have two 4 gauge and 4- 14 gauge speaker runs in there.

 

Your ground needs to go all the way to the battery!!!!!!!

 

Even more room in the tray when you take out unnecessary harnesses you don't need anymore. Still ran my 4 gauge power and ground thru the frame though.

 

Not according to the manufacturer. Ground to chasis.

 

Meh...what do I know.