2016 Street Glide - plug-n-play (?) OEM to after-market amp wiring harness
#11
thanks for chime-ing in! exactly the kind of person i need to speak to.
can i bother u with more questions,
can i bother u with more questions,
- what year is your bike?
- are u on the Boom GTS(19-20) or GT6.5 (18and earlier)
- were you previously using the Boom Stage 1 amp kit?
- did u do the install yourself? could i trouble u for a pic of the harness
- did u need to flash your head unit?
2, no boom amp just stock
3, I did do the install myself and no pics of the harness but I post a pic from their websit
4, and yes radio is flashed
This is for a 4 channel amp no sure if 2 channel is cheaper
#12
looks like i will be using this same kit,
the attached pic is fantastic didn't see it when scrolling thru the website.
could i trouble you to answer more questions
- you went with 4 speakers right?
- in the pic below, where do i need to splice the 4 wires without a connector to?
what are the middle non plug red brown yellow purple for? and it looks like i need to splice them without a connector
#13
super awesome thanks for your reply, really helpful
looks like i will be using this same kit,
the attached pic is fantastic didn't see it when scrolling thru the website.
could i trouble you to answer more questions
what are the middle non plug red brown yellow purple for? and it looks like i need to splice them without a connector
looks like i will be using this same kit,
the attached pic is fantastic didn't see it when scrolling thru the website.
could i trouble you to answer more questions
- you went with 4 speakers right?
- in the pic below, where do i need to splice the 4 wires without a connector to?
what are the middle non plug red brown yellow purple for? and it looks like i need to splice them without a connector
the only non connector wire that I used was a blue wire and that’s for a remote turn on signal to the amp the rest is not used very simply
The following users liked this post:
Jake Symmons (05-26-2020)
#14
#15
#17
Hi,
sorry i need more help again, regarding the MLOC745,
Yellow = battery +12vinput
Black = power (-) ground input
Blue = remote +12v output
Brown = reference ground (-)
for the brown wire that is "Referrence" Ground where do i hook it up to? frame of the bike or the batt terminal? or?
thank very much in advance.
where do i connect the "reference" Ground?
Thread
Thread Starter
Forum
Replies
Last Post
Bill Cameron
General Harley Davidson Chat
2
02-03-2020 04:16 PM