Flash or not to flash JM Audio
#1
Flash or not to flash JM Audio
So I got the JM XXRK-350SP2-14SG upgrade installed on my '18 Street Glide. While it is an improvement over stock, it is not great, yet. I have been told a flash AND retune will do the trick. It costs $175 in my neck of the woods to do this. Anyone out there have experience to tell me if it is worth it? I have heard all the good and bad about JM, just looking for the nitty gritty on your thoughts of a flash and retune. Thanks!
#5
#6
The following users liked this post:
AZStreetglide18 (02-13-2019)
#8
Do some checking around at local indy shops that use the techno research software and they should be able to flash your HU for you.
If you were in the Chicago area I would tell you to swing by and I would flash the HU for you as i have the equipment to flash the HUs with the JM flash along with other aftermarket flashes (fosgate,soundz) also including all the harley flashes
If you were in the Chicago area I would tell you to swing by and I would flash the HU for you as i have the equipment to flash the HUs with the JM flash along with other aftermarket flashes (fosgate,soundz) also including all the harley flashes
The following users liked this post:
AZStreetglide18 (02-13-2019)
#10
Took the easy way out and did the install not requiring the flash. Apparently there are two options for this. One with a green banded install wire harness and one without. The green can be done without the flash, the one without the green is for an install with the flash and retune