amateur audio build.
#1
amateur audio build.
Good day fellas, let me beat on this dead horse once again. I have a 2012 roadglide and ready to upgrade the audio. What I have so far are 2 amps.
JL audio 600/6
Hertz hpd4 1000.4
Here is what I am thinking for the audio build ,prv-6mr300 which are 6.5 for the fairing along with a set of hertz st25 horns in the gauge pods. The headunit will be an alpine unit of some sort. In the bags will be prv-10w650-4 which are a 10' mid-bass driver along with a set of prv-tw500My-Nd horns. I am no expert by any means, after reading countless threads and listening to videos on youtube and IG. I am hoping this budget build will be decent any and all suggestions welcomed.
JL audio 600/6
Hertz hpd4 1000.4
Here is what I am thinking for the audio build ,prv-6mr300 which are 6.5 for the fairing along with a set of hertz st25 horns in the gauge pods. The headunit will be an alpine unit of some sort. In the bags will be prv-10w650-4 which are a 10' mid-bass driver along with a set of prv-tw500My-Nd horns. I am no expert by any means, after reading countless threads and listening to videos on youtube and IG. I am hoping this budget build will be decent any and all suggestions welcomed.
#2
Originally Posted by Keshunjohnson
Good day fellas, let me beat on this dead horse once again. I have a 2012 roadglide and ready to upgrade the audio. What I have so far are 2 amps.
JL audio 600/6
Hertz hpd4 1000.4
Here is what I am thinking for the audio build ,prv-6mr300 which are 6.5 for the fairing along with a set of hertz st25 horns in the gauge pods. The headunit will be an alpine unit of some sort. In the bags will be prv-10w650-4 which are a 10' mid-bass driver along with a set of prv-tw500My-Nd horns. I am no expert by any means, after reading countless threads and listening to videos on youtube and IG. I am hoping this budget build will be decent any and all suggestions welcomed.
JL audio 600/6
Hertz hpd4 1000.4
Here is what I am thinking for the audio build ,prv-6mr300 which are 6.5 for the fairing along with a set of hertz st25 horns in the gauge pods. The headunit will be an alpine unit of some sort. In the bags will be prv-10w650-4 which are a 10' mid-bass driver along with a set of prv-tw500My-Nd horns. I am no expert by any means, after reading countless threads and listening to videos on youtube and IG. I am hoping this budget build will be decent any and all suggestions welcomed.
I would go Beyma mid bass myself but u might want to verify if the PRV u mentioned for your fairing is the one that delivered the best success from the PRV 6.5 product line in such location.
T
#3
The 6mr300's loook to be the sealed 6.5" iirc. Based on the parts express page it looks like they have been replaced with a new model. Not sure how many guys have tried them. I know Haze posted a pic of them installed in a set of bags with a 10" in the install thread. Not sure if that was an old or new install.
Most guys run the 6mr500ndy in either 4 or 8 ohm. I kind of like the idea of the sealed speaker, but not sure how they sound. For $35 ea might be worth it to just throw a set in and find out.
Zach
Most guys run the 6mr500ndy in either 4 or 8 ohm. I kind of like the idea of the sealed speaker, but not sure how they sound. For $35 ea might be worth it to just throw a set in and find out.
Zach
Thread
Thread Starter
Forum
Replies
Last Post
tundrabuilt
Audio Systems
7
06-05-2017 07:14 AM