Audio Systems Find answers to all of your stereo, speaker and other audio technology questions here.
Sponsored by:
Sponsored by:

2017 Street Glide

Thread Tools
 
Search this Thread
 
  #11  
Old 05-28-2018, 01:32 PM
travelingypsye's Avatar
travelingypsye
travelingypsye is offline
Stellar HDF Member
Join Date: Dec 2017
Location: indiana
Posts: 3,308
Received 655 Likes on 548 Posts
Default

Originally Posted by JMJOHN
Philly ,,,, ROKKER Stage4 system shown here, https://www.jmcorp.com/ProductDetail...30SP2-14SG-ST4 and I believe one of the best systems available,

100% plug-n-play but does require the J&M custom stage4 radio FLASH ,,,
100% plug and play AND you still get to take off the tank to run your amp wires AND you have to have your HU flashed for $50-150 at the HD dealer AND the $350 setup I mentioned above will STILL SOUND BETTER. Just some food for thought.


So let me think about this...........$1030 and need to make an appointment AND a trip to the dealer and spend $50-150 or spend $350 or so, forget the dealer trip and ride listening to a better sounding system for 1/3 the price.........That is a real hard decision to make. Fellas can you help me out?
 

Last edited by travelingypsye; 05-28-2018 at 01:40 PM.
The following users liked this post:
philly48 (05-28-2018)
  #12  
Old 05-28-2018, 01:38 PM
JMJOHN's Avatar
JMJOHN
JMJOHN is offline
Platinum Sponsor
Join Date: Apr 2007
Location: Tucson AZ
Posts: 2,531
Likes: 0
Received 58 Likes on 51 Posts
Default

well noted on the budget stated, but sometimes folks will spend a little more than planned ,,,,

also, with the HD Forums VIP discount from J&M, the actual price gets quite a bit closer to his goal ,,,,,
 
__________________
JMJOHN,,,, www.Jmcorp.com ,,,, send email direct to John@Jmcorp.com for your HD-Forums VIP Discount Promo Code.
  #13  
Old 05-28-2018, 01:46 PM
MMXIWG's Avatar
MMXIWG
MMXIWG is offline
Road Captain
Join Date: Oct 2011
Location: Smithfield, VA
Posts: 738
Received 29 Likes on 28 Posts
Default

Originally Posted by JMJOHN
well noted on the budget stated, but sometimes folks will spend a little more than planned ,,,,

also, with the HD Forums VIP discount from J&M, the actual price gets quite a bit closer to his goal ,,,,,
Good to hear about the discount. Combining those two factors together I can see your point. I would suggest you mention that when you respond to someone whose budget is lower than the products you recommend.
 
  #14  
Old 05-28-2018, 01:53 PM
travelingypsye's Avatar
travelingypsye
travelingypsye is offline
Stellar HDF Member
Join Date: Dec 2017
Location: indiana
Posts: 3,308
Received 655 Likes on 548 Posts
Default

Originally Posted by JMJOHN
well noted on the budget stated, but sometimes folks will spend a little more than planned ,,,,

also, with the HD Forums VIP discount from J&M, the actual price gets quite a bit closer to his goal ,,,,,
JMJohn, I will give you an E for effort brother, the problem is J&M sells equiptment for a unreal price and is midlevel at best. Now if J&M equipment was the best you could get then I could see a price that reflected it but still not what your systems cost even if they were the best. I feel for you as you work for them but I will tell you if even half of this country knew about this forum, J&M (along with other companies) would be bankrupt .
 
  #15  
Old 05-28-2018, 02:14 PM
philly48's Avatar
philly48
philly48 is offline
Cruiser
Thread Starter
Join Date: Mar 2017
Location: Philadelphia,PA
Posts: 159
Received 24 Likes on 13 Posts
  #16  
Old 05-28-2018, 02:17 PM
SBates08's Avatar
SBates08
SBates08 is offline
Extreme HDF Member
Join Date: Jan 2013
Location: Lake, Ms
Posts: 10,636
Received 1,239 Likes on 1,002 Posts
Default

Originally Posted by philly48
Thanks for your help! Do I need a mounting bracket for the amp?
No sir you don't need an amp tray. Your bike already has one that will hold this amp.

And don't fall for any of that J&M garbage. Regardless of Johns claims, it is NOT the best you can buy for your Harley Davidson.
 
The following users liked this post:
philly48 (05-28-2018)
  #17  
Old 05-28-2018, 02:19 PM
travelingypsye's Avatar
travelingypsye
travelingypsye is offline
Stellar HDF Member
Join Date: Dec 2017
Location: indiana
Posts: 3,308
Received 655 Likes on 548 Posts
Default

Originally Posted by philly48
Thanks for your help! Do I need a mounting bracket for the amp?
Nope it will fit right on the amp tray you already have above the HU.
 
The following users liked this post:
philly48 (05-28-2018)
  #18  
Old 05-28-2018, 03:25 PM
philly48's Avatar
philly48
philly48 is offline
Cruiser
Thread Starter
Join Date: Mar 2017
Location: Philadelphia,PA
Posts: 159
Received 24 Likes on 13 Posts
Default

Originally Posted by travelingypsye
Nope it will fit right on the amp tray you already have above the HU.

The link you included for the line lever isn't working, but I found it on the site. What options do I pick for it?

Thanks again for the help.
 
  #19  
Old 05-28-2018, 03:33 PM
travelingypsye's Avatar
travelingypsye
travelingypsye is offline
Stellar HDF Member
Join Date: Dec 2017
Location: indiana
Posts: 3,308
Received 655 Likes on 548 Posts
Default

Originally Posted by philly48
The link you included for the line lever isn't working, but I found it on the site. What options do I pick for it?

Thanks again for the help.
Put in what HU you have either a 4.3 or 6.5 and choose front speakers. That LL will be plug and play as it will plug into the hu speaker outs and rca from the LL to the amp rca inputs. Dammit I forgot to add stinger rca male to male 1.5' cables to the setup I told you about. That just may take the build over $350. When you order the line leveler, biketronics has the rca cables and that may save some shipping.
 
The following users liked this post:
philly48 (05-28-2018)
  #20  
Old 05-28-2018, 04:14 PM
philly48's Avatar
philly48
philly48 is offline
Cruiser
Thread Starter
Join Date: Mar 2017
Location: Philadelphia,PA
Posts: 159
Received 24 Likes on 13 Posts
Default

Originally Posted by travelingypsye
Put in what HU you have either a 4.3 or 6.5 and choose front speakers. That LL will be plug and play as it will plug into the hu speaker outs and rca from the LL to the amp rca inputs. Dammit I forgot to add stinger rca male to male 1.5' cables to the setup I told you about. That just may take the build over $350. When you order the line leveler, biketronics has the rca cables and that may save some shipping.
Is this what your talking about?

https://www.ebay.com/itm/Stinger-SI4...YAAOSwxKtX~niW

I don't see them on the biketronics website.
 


Quick Reply: 2017 Street Glide



All times are GMT -5. The time now is 03:33 PM.