Which amp works best with those

 

Arc audio Moto 600.4 works quite well on the AW6.5 and AT28 combo. Very compact but very powerful. Just installed the aforementioned equipment today In my street glide and I'm blown away by the clairity and volume at 80 mph

 

so Tony, I'm guessing you decided not to throw the Moto 600 in the river?

 

Here's a thread I started on RoadGlide.org

http://www.roadglide.org/#/topics/339658

 

The Arc moto 600 is a fine amp, actually made in the same factory in China as the J&M ROKKER 630w ,,,,

it will work very well in your RoadGlide with the proper RCA-Input/Line Levelers and Harley radio FLASH ,,,,, (J&M Custom flash is preferred) ,,,,

then correct adjustments on the panel below the ID badge ,,,,,,

 

Will this amp work with the stock speakers or will they need to be changed too?

 

You will need to change out the stock speakers as they will not last long with the added power to them from the Arc 600.4 amp

 

Ditto!! 5 minutes max at full volume. Lol!!!

 

gsabo28

J&M ROKKER XXR Stage4 audio kit option for your RoadGlide special is here https://www.jmcorp.com/ProductDetail...30SP2-15RG-ST4 ,,,,

 

Holy crap - that's a lot of cash! Anything cheaper?
is it pretty easy to do yourself, or should I take it to someone? Not too crazy about removing the fairing - that would require two people, right?