J&M 3600 Amp
#21
#23
Originally Posted by SBates08
Bike needs to be running, set bass and treble in the middle, set crossover to Full pass, and adjust gains as Tailwind mentioned above.
I'd also unplug the RCA's for the rear and set gain on the front then do the same for the rears.
I'd also unplug the RCA's for the rear and set gain on the front then do the same for the rears.
T.
#24
Here you go. This is where the Auto Stereo install guy has it set.
I didn't watch him doing it, but I just now turned both gains to straight up and down and things got REAL LOUD, but I don't know what the correct settings should be, and I don't think the Auto guy did either.
I did read the "Sticky" about doing that. Or would someone know, or can give me a safe ballpark estimate of where I should set the controls?
I didn't watch him doing it, but I just now turned both gains to straight up and down and things got REAL LOUD, but I don't know what the correct settings should be, and I don't think the Auto guy did either.
I did read the "Sticky" about doing that. Or would someone know, or can give me a safe ballpark estimate of where I should set the controls?
#25
Thread
Thread Starter
Forum
Replies
Last Post
HogPilot54
Audio Systems
15
07-15-2017 03:31 PM