how to add an amp to a detachable tour pak
#1
how to add an amp to a detachable tour pak?
Very limited audio knowledge. I'm sure this is probably covered in this forum but after searching awhile, I haven't been able to find it.
I added a detachable tour pak with speakers to my 2014 street glide. The speakers in the front are stock, and the ones in back are Boom 1. I would like to add an amp so that i can hear the radio with a full face helmet on. I know at least the front speakers would need replaced.
But my question is can this be done and keep the tour pak detachable? I really don't take it off often but like to have the option.
Thanks
I added a detachable tour pak with speakers to my 2014 street glide. The speakers in the front are stock, and the ones in back are Boom 1. I would like to add an amp so that i can hear the radio with a full face helmet on. I know at least the front speakers would need replaced.
But my question is can this be done and keep the tour pak detachable? I really don't take it off often but like to have the option.
Thanks
Last edited by toecat2000; 07-30-2017 at 12:22 PM.
#2
The following users liked this post:
toecat2000 (07-31-2017)
#4
#6
No. I worded by question badly. I do want the amp in the fairing. But I haven't seen any set ups that discuss quick disconnects for the back. Just a matter of running the wires and making my own disconnects?
#9
#10