Audio Systems Find answers to all of your stereo, speaker and other audio technology questions here.
Sponsored by:
Sponsored by:

Tuning the AT28 tweeters

Thread Tools
 
Search this Thread
 
  #11  
Old 06-27-2017, 12:07 PM
Markeje's Avatar
Markeje
Markeje is offline
Advanced
Join Date: Aug 2014
Location: IL
Posts: 85
Received 1 Like on 1 Post
Default

Originally Posted by Tailwind
How many watts u running out of the 600.4?

T
Well with it set at 34V just about 300 per side.
 

Last edited by Markeje; 06-27-2017 at 01:47 PM.
  #12  
Old 06-27-2017, 12:19 PM
BaggerAudioLab's Avatar
BaggerAudioLab
BaggerAudioLab is offline
Banned
Join Date: Dec 2016
Location: Miami, FL
Posts: 1,177
Received 196 Likes on 142 Posts
Default

Originally Posted by Markeje
Well with it set at 34V just about 300 per side.

yes. You are going to blow something.
 
  #13  
Old 06-27-2017, 12:23 PM
BaggerAudioLab's Avatar
BaggerAudioLab
BaggerAudioLab is offline
Banned
Join Date: Dec 2016
Location: Miami, FL
Posts: 1,177
Received 196 Likes on 142 Posts
Default

Originally Posted by SgtMic
The TXO-HP is an inline 12d/oct filter with a 4kHz crossover point at 4ohms and a power rating of 100 watts RMS.

ATs "published" freq 1,500-30k
a dome tweeter won't go that low naturally that's why the TXO is at 4K so that the roll off at 12db isn't as much power.
 
  #14  
Old 06-27-2017, 01:15 PM
Markeje's Avatar
Markeje
Markeje is offline
Advanced
Join Date: Aug 2014
Location: IL
Posts: 85
Received 1 Like on 1 Post
Default

If I am calculating right...not my strong suit here...running 300 bridged off an arc moto 600.4.
Volume at 27 = 34v out of the arc 600.4..
Would I only be able to run my volume at 19 of 35 to put 105rms output on my tweeters?
 

Last edited by Markeje; 06-27-2017 at 02:38 PM.
  #15  
Old 06-27-2017, 03:13 PM
BaggerAudioLab's Avatar
BaggerAudioLab
BaggerAudioLab is offline
Banned
Join Date: Dec 2016
Location: Miami, FL
Posts: 1,177
Received 196 Likes on 142 Posts
Default

Just because your amp can put out that power clean doesn't mean your speakers can handle it. 200w is the max I would give the AW's.
 
  #16  
Old 06-27-2017, 03:18 PM
Markeje's Avatar
Markeje
Markeje is offline
Advanced
Join Date: Aug 2014
Location: IL
Posts: 85
Received 1 Like on 1 Post
Default

Originally Posted by BaggerAudioLab
Just because your amp can put out that power clean doesn't mean your speakers can handle it. 200w is the max I would give the AW's.
OK - well I need to adjust my 600.4 then. Time to break out the DVM.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Edward Evans
Audio Systems
3
04-22-2019 03:11 PM
Billf
Audio Systems
11
07-16-2015 01:02 PM
positive charge
Audio Systems
6
06-13-2014 05:25 PM
booch
Audio Systems
2
03-13-2013 10:46 AM
dbuff
Touring Models
6
05-12-2008 11:39 AM



Quick Reply: Tuning the AT28 tweeters



All times are GMT -5. The time now is 09:33 AM.