Audio Systems Find answers to all of your stereo, speaker and other audio technology questions here.
Sponsored by:
Sponsored by:

Kappa 62.11i Adapter Rings

Thread Tools
 
Search this Thread
 
  #1  
Old 08-08-2016, 06:36 PM
ngaarcher's Avatar
ngaarcher
ngaarcher is offline
Stage III
Thread Starter
Join Date: May 2012
Location: North Georgia
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Kappa 62.11i Adapter Rings

I'm having a hard time getting adapter rings that will fit the Kappas. I first ordered the 6 1/2" adapter rings that Rickford Fosgate sells and they were way off. I then ordered a set made by Dragonfly Cycle Concepts and they are closer to fitting but I can only get a couple holes to line up and the rubber ring on the speaker is very close to rubbing on the adapter. Any suggestions as to what adapter will work?
 
  #2  
Old 08-08-2016, 06:47 PM
SBates08's Avatar
SBates08
SBates08 is offline
Extreme HDF Member
Join Date: Jan 2013
Location: Lake, Ms
Posts: 10,636
Received 1,239 Likes on 1,002 Posts
Default

Originally Posted by ngaarcher
I'm having a hard time getting adapter rings that will fit the Kappas. I first ordered the 6 1/2" adapter rings that Rickford Fosgate sells and they were way off. I then ordered a set made by Dragonfly Cycle Concepts and they are closer to fitting but I can only get a couple holes to line up and the rubber ring on the speaker is very close to rubbing on the adapter. Any suggestions as to what adapter will work?
Metra 82-9601
 
  #3  
Old 08-08-2016, 07:27 PM
ultra_classic's Avatar
ultra_classic
ultra_classic is offline
Club Member
Join Date: Jan 2011
Location: Ontario, Canada
Posts: 937
Received 22 Likes on 19 Posts
Default

Originally Posted by ngaarcher
I'm having a hard time getting adapter rings that will fit the Kappas. I first ordered the 6 1/2" adapter rings that Rickford Fosgate sells and they were way off. I then ordered a set made by Dragonfly Cycle Concepts and they are closer to fitting but I can only get a couple holes to line up and the rubber ring on the speaker is very close to rubbing on the adapter. Any suggestions as to what adapter will work?
I used my adapter from BT, that I had already
 
  #4  
Old 08-08-2016, 10:44 PM
Bertk's Avatar
Bertk
Bertk is offline
Ultimate HDF Member
Join Date: Mar 2008
Location: SW Florida
Posts: 5,788
Received 203 Likes on 177 Posts
Default

These will work also.
 
  #5  
Old 08-09-2016, 01:28 AM
glooney's Avatar
glooney
glooney is offline
Intermediate
Join Date: Feb 2015
Location: Mobile,Al
Posts: 36
Likes: 0
Received 2 Likes on 2 Posts
Default

Agree on the Metra 82-9601 👍
 
  #6  
Old 08-09-2016, 04:34 AM
Winddancer4u's Avatar
Winddancer4u
Winddancer4u is offline
Advanced
Join Date: Aug 2015
Location: Salisbury, Ma
Posts: 63
Received 2 Likes on 2 Posts
Default

Yup, go with the Metra.. Just installed them Sunday, fit perfect..
careful with supplied screw on the bottom..it will dimple the front of the fairing if you screw it in to tight..

https://www.amazon.com/Metra-82-9601.../dp/B00JKXSJTM
here they are shipped for under 12 bucks
 
  #7  
Old 08-09-2016, 12:16 PM
ngaarcher's Avatar
ngaarcher
ngaarcher is offline
Stage III
Thread Starter
Join Date: May 2012
Location: North Georgia
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the input guys. I just ordered a set of the Metras from Amazon, they should be here tomorrow.
 
  #8  
Old 08-09-2016, 12:48 PM
Sturgis67's Avatar
Sturgis67
Sturgis67 is offline
Road Master
Join Date: Mar 2015
Location: Texas....6ft from the sun
Posts: 908
Received 117 Likes on 94 Posts
Default

Originally Posted by Winddancer4u
Yup, go with the Metra.. Just installed them Sunday, fit perfect..
careful with supplied screw on the bottom..it will dimple the front of the fairing if you screw it in to tight..

https://www.amazon.com/Metra-82-9601.../dp/B00JKXSJTM
here they are shipped for under 12 bucks
yeah, these.
 
  #9  
Old 08-10-2016, 12:16 PM
LL247's Avatar
LL247
LL247 is offline
Former Sponsor
Join Date: Apr 2012
Location: Pittsburgh
Posts: 417
Received 7 Likes on 6 Posts
Default

The problem with most adapters is they're 6.5 where most speakers now need a 6.75 adapter. That's all we use now.
 
  #10  
Old 08-10-2016, 12:31 PM
Makdaddy's Avatar
Makdaddy
Makdaddy is offline
Road Master
Join Date: Jul 2009
Location: Illinois
Posts: 830
Received 44 Likes on 38 Posts
Default

Originally Posted by LL247
The problem with most adapters is they're 6.5 where most speakers now need a 6.75 adapter. That's all we use now.
^^^^^^ This
and this http://www.ebay.com/itm/HARLEY-6-75-...NXpp-E&vxp=mtr
 


Quick Reply: Kappa 62.11i Adapter Rings



All times are GMT -5. The time now is 01:21 PM.