Looking for an amp install thread for rushmores
#21
It shows you how right on the end of the amp where the speaker wires hook up. Left + and right - on both front and rear. Front goes to one speaker and rear goes to the other.
#22
#23
Originally Posted by Jaye H
LL247 isn't answering PM's from me, so I guess I'll pick them up elsewhere. I'm gonna go with the 6.2 and just try to figure out mounting the tweeter on my own.
T.
#24
LL is at a rally and likely not on forum past few days at least. If you need to contact him hit me up or call the shop. (724) 516-3805. I can message him outside the forum and usually get a hold of him.
#25
The amp on a RGS goes UNDER the radio, so it's a little more extensive install than the Bat Wings,, I put in the BT 4180 amp. It came with the mounting bracket you'll need. After removing the fairing outer shell, (Only 10 bolts/screws I took one side of headlight loose and let it hang gently while doing the install. You'll want the Tank off, and a heavy towel for front fender. Do you have rear speakers too? (Bags or TP?) I had all painted things off but front and rear fenders for my install,, It was at about 1500 miles on bike, I wondered if it'd ever run again, Grin. I'll be happy to answer any questions you have.
#26
I found the Hawg Wired grills on ebay for like 49.00.... Have not bought them yet,, the stock ones don't really bother me that much, I agree the Hawgs look better thought.
#27
Originally Posted by JimTJr
I found the Hawg Wired grills on ebay for like 49.00.... Have not bought them yet,, the stock ones don't really bother me that much, I agree the Hawgs look better thought.
T.
#30