So my setup is I have a bt4180 with bt355 LL. I have Millie pro 690 in my bags with hogworkz lids and extended bags and I have 165 in my fairing with them Bing in the pods, not ported may need to no clue though. I just don't feel like after all that money I spent they sound that great. I don't know if it's me or what it is. Maybe I don't have it set up right. Could really use some help if anyone has any ideas

 

Port or ditch the pods entirely. Some have good results porting 2-3" with polyfill and other prefer to eliminate them entirely with biketronics brackets. Your amp is good for powering that setup. Also you need the correct flash. Some of the Rushmore guys can chime in on that. 1.19.0 or something has been the best so far. Make sure the LL are on default settings.

 

So I have adjusted the gain already. I will look into porting them. How do I check which flash. I haven't had it flashed since last summer so I know it's been a while on that part.

 

Select Home > Setup > System Information > Software

 

Put LL gain back at default. Do NOT download this version. You want 1.19.0
http://www.harley-davidson.com/conte...downloads.html
https://www.dropbox.com/s/5ozwkyt1ri....19.0.zip?dl=0

 

3" holes in my pods helped with the 602's. Also put some poly fil in, but could probably go either way, with or without.






Edit: this wiring has since been cleaned up.

 

Looks like I need to let some air in. I also checked and I have version 1.19.1 so I need to fix that as well this weekend

 

Not sure how u have tuned these speaks but if u have a cheap DMM and a little time if might be worth setting the LL gains off the Ohm Law recommended VAC and from there very fine tuning based on your gut.
Those speaks should sound pretty damn good w that amp. Get those speaks the max clean power possible.

If ur not familiar with the DMM method, have a peek at the Sticky.

T

 

im going to download 1.19.0 and start there then port my speaker box and adjust my LL and then go from there

 

ive got a DMM and the test tone ready to go if you need a hand? PM me if your interested im here to help if I can.