1.19.0 vs 1.19.2
#33
Most of us that notice an improvement with 1.19.0 are using aftermarket audio components, the BT Line Leveler and the stock flash. I don't know if there is any sound improvement using 1.19.2 on stock Boom setup.
#34
I'm running aftermarket components as well. I've just had a few people tell me they did both the BT355 AND flash(no amp/4 speakers) and it made a huge difference. Just looking for some validity.
#35
The 4 speaker NO AMP is the stock flash for the Ultras. This is what you would want on a SG or RG when adding extra speakers along with enabling rear speaker outputs and Fade.
#36
Cycle sounds line leveler with 2 PBR 300x2. Folcal fronts, Hogtune 6x9 lids. The 19.1.2 made such a bad change that I knew to research the forum and see what others were doing. Turns out, the 1.19.0 is a much better sound for this setup. This was my first flash since buying it new in 2014.
#37
Originally Posted by Racin929
Cycle sounds line leveler with 2 PBR 300x2. Folcal fronts, Hogtune 6x9 lids. The 19.1.2 made such a bad change that I knew to research the forum and see what others were doing. Turns out, the 1.19.0 is a much better sound for this setup. This was my first flash since buying it new in 2014.
#38
Cycle sounds line leveler with 2 PBR 300x2. Folcal fronts, Hogtune 6x9 lids. The 19.1.2 made such a bad change that I knew to research the forum and see what others were doing. Turns out, the 1.19.0 is a much better sound for this setup. This was my first flash since buying it new in 2014.