Soundstream PN4.1000D Amp
#11
#12
mounting an ss pn4.1000d
There are two options for installing the 1000D in a Rushmore batwing. One is to modify the stock mount on top of the radio as shown in this thread.
The other is to use the J&M amp mounting kit. Take a look at post #12 in this thread. Scott14SG did the install in this thread.
Loosing FM in the Rushmore models is rare.
The other is to use the J&M amp mounting kit. Take a look at post #12 in this thread. Scott14SG did the install in this thread.
Loosing FM in the Rushmore models is rare.
#13
I am accumulating the parts now and probably won't get around to doing the upgrade for a while. I will probably sell the RF PBR 300x2, the kappas and magic box as a set but I will let you know when I am ready to sell.
#14
Thanks Bertk, lots of good information here and after reading through it I decided to go with the over priced mounting plate. I tend to be a bit **** about doing clean installs even when it cannot be seen and not having any skills in fabrication I decided that for it would be the best way to go. And an extra thanks for saving me a few bucks by adding the Phat Performance link.
#16
There hardware is high quality, at least what I have used, but there audio is sub-standard and over priced.
Last edited by Bertk; 05-15-2016 at 02:33 PM.
#18
Soundstream PN4.1000D
For those of you that have purchased a Soundstream pn4.1000d. I have bought received and sent back 2 of them from Amazon because I keep getting open boxes and everything inside the box has been opened like they were returned and resold. So where is a good reputable place to buy one?
#19
For those of you that have purchased a Soundstream pn4.1000d. I have bought received and sent back 2 of them from Amazon because I keep getting open boxes and everything inside the box has been opened like they were returned and resold. So where is a good reputable place to buy one?