Audio Systems Find answers to all of your stereo, speaker and other audio technology questions here.
Sponsored by:
Sponsored by:

2015 Ultra speaker wire color

Thread Tools
 
Search this Thread
 
  #1  
Old 04-02-2016 | 09:21 AM
MAXIMUS1968's Avatar
MAXIMUS1968
Thread Starter
|
Intermediate
Joined: Apr 2016
Posts: 25
Likes: 0
From: NC
Default 2015 Ultra speaker wire color

Hello, I am trying to figure out where to come from my rear speakers to a newly installed amp. All the wires from everything go into a harness that connects to the rear of the radio. Does anyone have a wiring manual that shows what color the speaker wires are at the harness?


Thanks,
Bryan
 
  #2  
Old 04-02-2016 | 09:58 AM
Babyboy's Avatar
Babyboy
Stellar HDF Member
Joined: Aug 2014
Posts: 2,645
Likes: 473
From: Lockport Illinois
Default

If you didn't get the break out harness offered by Biketronics you will have to cut and splice the rear speaker wires. Here is a picture of the radio harness

2015 Ultra speaker wire color-20160402_095458.jpg
 
The following users liked this post:
MAXIMUS1968 (04-02-2016)
  #3  
Old 04-02-2016 | 10:01 AM
MAXIMUS1968's Avatar
MAXIMUS1968
Thread Starter
|
Intermediate
Joined: Apr 2016
Posts: 25
Likes: 0
From: NC
Default

Thanks.... this should help

Will the Biketronics harness fit on any amp and factory radio....do you have a link to it
 

Last edited by ChickinOnaChain; 04-02-2016 at 12:15 PM.
  #4  
Old 04-02-2016 | 10:12 AM
HardRider1's Avatar
HardRider1
Road Warrior
Joined: Jun 2014
Posts: 1,357
Likes: 91
From: Michigan
Default



Here it is again without the blue tinting 2015 Ultra Radio Connections

In the event you did not know, "BE" represents the color blue LBE is light blue
 

Last edited by HardRider1; 04-02-2016 at 10:16 AM.
The following 2 users liked this post by HardRider1:
MAXIMUS1968 (04-02-2016), nhbubba (04-21-2018)
  #5  
Old 04-02-2016 | 10:27 AM
Bertk's Avatar
Bertk
Ultimate HDF Member
Joined: Mar 2008
Posts: 5,788
Likes: 203
From: SW Florida
Default

Originally Posted by MAXIMUS1968
Will the Biketronics harness fit on any amp and factory radio....do you have a link to it
The BT BO harness is designed for 2014+ Rushmore Ultras only with the stock HU. The 2014+ Ultra models have no rear speaker connections under the fairing. The BOH allows for a plug & play install using the BT line levelers.
Here is a pic of what they look like. Three are two in this pic.
 
Attached Thumbnails 2015 Ultra speaker wire color-pic-1-s.jpg  

Last edited by Bertk; 04-02-2016 at 10:34 AM.
  #6  
Old 04-02-2016 | 10:28 AM
Babyboy's Avatar
Babyboy
Stellar HDF Member
Joined: Aug 2014
Posts: 2,645
Likes: 473
From: Lockport Illinois
Default

Originally Posted by MAXIMUS1968
Will the Biketronics harness fit on any amp and factory radio....do you have a link to it
The breakout harness keeps you from cutting the harness for the rear speakers for the 14 and up ultra and limited.
Yes it will work with other aftermarket equipment.
There is no listing on the Biketronics web page for the harness you would have to call them
 
  #7  
Old 04-02-2016 | 10:29 AM
MAXIMUS1968's Avatar
MAXIMUS1968
Thread Starter
|
Intermediate
Joined: Apr 2016
Posts: 25
Likes: 0
From: NC
Default

OK....mine isn't a Rushmore model so I suppose I will have to just use the pics of the wiring diagram and splice them out.....unless there is another option?
 
  #8  
Old 04-02-2016 | 10:34 AM
Babyboy's Avatar
Babyboy
Stellar HDF Member
Joined: Aug 2014
Posts: 2,645
Likes: 473
From: Lockport Illinois
Default

Originally Posted by MAXIMUS1968
OK....mine isn't a Rushmore model so I suppose I will have to just use the pics of the wiring diagram and splice them out.....unless there is another option?
Rushmore is a 14 and newer FLH model
The stock HU is either the 4.3 or the upgraded 6.5 Gt with touch screen and nav.
 
  #9  
Old 04-02-2016 | 10:37 AM
HardRider1's Avatar
HardRider1
Road Warrior
Joined: Jun 2014
Posts: 1,357
Likes: 91
From: Michigan
Default

Originally Posted by MAXIMUS1968
OK....mine isn't a Rushmore model so I suppose I will have to just use the pics of the wiring diagram and splice them out.....unless there is another option?
Where are you planning on adding the amp?

You could make up your own harness, here is a company that sells the Duetcsh & JAE connectors

http://www.cycleterminal.com/jae-mx19.html

and automotive style wiring of which you can select your colors

http://www.ebay.com/itm/10-AUTOMOTIV...TH-100-CHOICES

Makes for a great install, but more time to do.
 

Last edited by HardRider1; 04-02-2016 at 10:54 AM.
  #10  
Old 04-02-2016 | 10:39 AM
Smokey Stover's Avatar
Smokey Stover
Road Warrior
Joined: May 2013
Posts: 1,430
Likes: 55
From: Florida
Default

Why not unplug the wires from the rear speakers connect some new wire and run it back to your amp input then new wires out of amp back to speakers, No cutting that very delicate/fussy Can-Bus harness.
 
The following users liked this post:
MAXIMUS1968 (04-02-2016)


Quick Reply: 2015 Ultra speaker wire color



All times are GMT -5. The time now is 02:31 AM.