Thinking it was 4 Ys coming off the Line Levelers but will get u an exact spec list when I get home. I dig ur speaker choice!!!!!
T
Okay Tailwind, I made a diagram of how I think you ran everything...just stuck on how you connected the rear LL to 6 of the open RCAs...correct me if my diagram is wrong. Thanks bro.
Yep!!! You nailed it!! Bad **** diagram and very helpful for all of us to see it presented this way, not only for the RCA split but also the bridge.
As we discussed on the tele, and for the benefit of our Brothas, the Ys typically sold over the counter are a single female and Ys are males. Thus u simply just have to first leave the LL with a short Male to Male RCA then then rest flows perfect. Before u start, color code the Ys with all red electrical tape for 2 sets and all black or white electrical tape for the other sets and u won't waste any brain cells plugging stuff in to the right place.
The first RCA was 18" so I could stash my LL off to the side either on the BT bracket wall or in the little void on the clutch side of the HU/Amp Tray.
Yep!!! You nailed it!! Bad **** diagram and very helpful for all of us to see it presented this way, not only for the RCA split but also the bridge.
As we discussed on the tele, and for the benefit of our Brothas, the Ys typically sold over the counter are a single female and Ys are males. Thus u simply just have to first leave the LL with a short Male to Male RCA then then rest flows perfect. Before u start, color code the Ys with all red electrical tape for 2 sets and all black or white electrical tape for the other sets and u won't waste any brain cells plugging stuff in to the right place.
The first RCA was 18" so I could stash my LL off to the side either on the BT bracket wall or in the little void on the clutch side of the HU/Amp Tray.
Great presentation Tundra!!!
T.
Thanks for all the help T, Haze, and the rest of the guys that posted!!! Can't wait to get going on this upgrade! I will post vids when complete. Aloha!
03-07-2016, 08:09 PM
