Lids - 6x9 or 6.5 Component
#51
And to add another possibility, I was cleaning my parts shelf in the garage and forgot I have 2 extra sets of Rushmore bag lids...hmmm...maybe instead of the 6x9s mounted underside, I drop 2 pairs of 6.5s in the top?
#53
Had 4 different 6x9s in there and was not feeling the luv with the ones I was using as I really was not getting the SQ and SPL that my ears seem to like. I can honestly say that the 6.5 components blow away my expectations as a balance of SQ, SPL, and Bass. Gonna hit the road test tomorrow and will advise.
Had the fire sale K2 KRs in hand and the manager intercepted me and was damn excited to get rid of his demos. Think the KRs would have been a damn good purchase too, and same price as the 6x9s that were on my short list.
Thinking an 8" slim subwoof will really bring this all together. You know damn well that this unicorn hunt is far from over!!!! Flat broke now, so it may be a little while!!!!!
I guess the tuff question is, what level of component will potentially deliver the SQ, SPL, and bass that might outweigh the 6x9 platform?
Very good discussion stuff.
T.
Had the fire sale K2 KRs in hand and the manager intercepted me and was damn excited to get rid of his demos. Think the KRs would have been a damn good purchase too, and same price as the 6x9s that were on my short list.
Thinking an 8" slim subwoof will really bring this all together. You know damn well that this unicorn hunt is far from over!!!! Flat broke now, so it may be a little while!!!!!
I guess the tuff question is, what level of component will potentially deliver the SQ, SPL, and bass that might outweigh the 6x9 platform?
Very good discussion stuff.
T.
Your system sounds awesome I am getting HT lids and thinking now about doing what you did with the 6.5's. However, I am going to exhaust my 6x9 options first, so I have two questions if you can help me please.
1.What 6x9 did you have in your HT lids?
2. Do you know if 692's will drop straight in the HT lids with no modifications?
Thanx in advance,
Paul
#58
#59
Originally Posted by hbsoldier3
T,
1.What 6x9 did you have in your HT lids?
2. Do you know if 692's will drop straight in the HT lids with no modifications?
Thanx in advance,
Paul
1.What 6x9 did you have in your HT lids?
2. Do you know if 692's will drop straight in the HT lids with no modifications?
Thanx in advance,
Paul
As for the transition from HT Speakers to the drop in set-up, I had to get rid of the tweeter bridge. So in order to do this u only want to eliminate the bridge part, enter the Dremmel. Whack the bridge part off and secure the surviving piece in place with silicone to get it nice and water tight and whala, a flat platform for dropping 6x9s in. Now not sure how the lids are delivered when u don't get the HY speaks with them but u do want to make certain u have something to fill that gap or u will get water in bags. U might ask HT how the address that issue as they r designed to be used w HT speaks. I'm certain there is a non redneck engineering way to have these delivered.
2. They fit mine perfect after original 30 minute mod.
Below is a pic of than damn tweeter stuffed in there.
T.
Last edited by Tailwind; 03-08-2016 at 02:27 PM.
#60
3:20 mark of the install video
http://www.hogtunes.com/bikes/ultra_limited.html
Last edited by hbsoldier3; 03-08-2016 at 02:46 PM. Reason: Added intell