I feel your pain, tried taking a couple vids of mine with an IPad and they didn't sound nearly as good on the video as it does in person. Sadly my vids are too big to upload here.
Had to do some mods. Made a wedge to fit between the clamp and cup holder so it hangs somewhat level. Added a longer screw. Trimmed off some of the top of the clamp to the top and bottom rest on the clutch master cylinder. Otherwise it will slip.
Originally Posted by Bertk
The more I think of it I think the Moto's would be better back there because of the adjustable tweeters. Here's a pic of the Moto 602 (left) and the BT 6.5 which we know will fit. The Moto is a little shorter and the magnet is a little bigger.
And another pic of the Hertz Pro vs the BT 6.5.
Thanx twice, I found some loose connectors on the AV cables at the amp yesterday. However, I still have a slight distortion from the right rear that I can hear when the bike is running. Will have to talk to Bill about BT-355 fine-tuning this week. Whatever the outcome I gonna get the Arc Moto's with the V-Twin adapters. It will be close with my Corbin seat, but no guts no glory. The pic's are with the Alpine SPR 60's.
Thanx again,
Paul
Do you have any pics of the Moto's in the rear pod's? Did you use an adapter? I ask because that is the set up I want to go with.
Thanx,
Paul
I'll snap a couple of pic tomorrow when I get home. I purchased the pods from Elroy June to install my Moto's. But I also have the adapters from V-twin and the Moto's fit nicely with the V-twin adapter as well.
I'll snap a couple of pic tomorrow when I get home. I purchased the pods from Elroy June to install my Moto's. But I also have the adapters from V-twin and the Moto's fit nicely with the V-twin adapter as well.
Thanx, I am looking at the V-Twin adapters; but I will contact Elroy to see when his pods for the 14's and up are coming out.
Paul
01-17-2016, 02:47 PM
