So... whats the plan Bert, 2 amps, new HU, where are the Mille's going.. lowers? Your sh*t already sounds good, can't wait to hear the new set up good luck bro!

 

Yep that's just about right. Hyped also, just have to get started on it.

 

Another bike, 2008 SG. Mille's in the fairing for starters.

 

Looks great Bert

Well I have the speakers BT 6.5 for the dash, ss 1000 amp, wiring, just got a Sony 310, now I need the install/thumb kits, at 1.51 Can to 1.00 US it will have to wait for a super deal ,

 

Question installing the Kenwood 998 HU/Retro Kit.
From what I understand the Blue/Yellow - Black - Red & Yellow are the only wires coming from HU that connect to the Retro modual?

Mount the amp to the vinyl cover over the HU using Velcro?

 

Everything's installed. Had a little problem finding out where to connect the remote startup wire for the amp. So I used the cig lighter and got a pop through the speakers each time the ignition was turned on. With a little help from Haze I found that the blue/white (power control wire) labeled "P.CONT" is the wire to use to turn on the amp. No more popping.

The next step is to go into the Kenwood 998 setting and do some tweaking. I'm going to start with these settings and see how it sounds.

 

Install complete.
2008 SG - Biketronics BT2180 Amp - Hertz Mille MPX 165.3 PRO Speakers - Kenwood eXcelon KDC-X998 Head Unit - Biketronics BT1005X Install Kit with hand controls. Letting them break in some so volume at 23. It may still need some tuning, open to suggestions. Here's a .

 

Sounds Fantastic Bert!! Nice job!!

 

Bert, for just two speakers that sounds really good!! You can really dial in the sound with that 998! Nice job!

 

Thanks man. Still tiring to figure out all these tuning features on the 998

Thanks Mike. Do you by chance have the 998 audio setting you use for the BT speakers?