Audio Systems Find answers to all of your stereo, speaker and other audio technology questions here.
Sponsored by:
Sponsored by:

2014 FLHTK Bike Tronics install for a newbie.

Thread Tools
 
Search this Thread
 
  #141  
Old 05-08-2016, 09:39 PM
Warchild1$'s Avatar
Warchild1$
Warchild1$ is offline
Intermediate
Join Date: Apr 2016
Location: Western Washington
Posts: 39
Received 28 Likes on 13 Posts
Default

Restarting a thread
What's the secret to getting the fairing back on? I've had mine on n off 10 times adjusting wires per others pictures. Keeps popping out the bottom or large gap at the top
Time for a beer
 
  #142  
Old 05-08-2016, 09:46 PM
hbsoldier3's Avatar
hbsoldier3
hbsoldier3 is offline
Elite HDF Member

Thread Starter
Join Date: May 2007
Location: Bear Flag, lower end
Posts: 4,452
Received 797 Likes on 623 Posts
Default

Originally Posted by Warchild1$
Restarting a thread
What's the secret to getting the fairing back on? I've had mine on n off 10 times adjusting wires per others pictures. Keeps popping out the bottom or large gap at the top
Time for a beer
I start by getting the bottom of the fairing tabs inside the skirt, then move to the right upper I have to lower the fairing to get the bolt to line up, which in turn pops the bottom out of the skirt; no big deal. Then I go and out the left upper in a few turns, and pop the lower part back into the skirt. From there I just tighten up the top bolts a little more start the bottom screws then make sure the bottom tabs are inside the skirt, then tighten all the bolts. Everybody is different, but this works for me.
 
The following users liked this post:
indiggio (05-09-2016)
  #143  
Old 05-08-2016, 10:53 PM
Warchild1$'s Avatar
Warchild1$
Warchild1$ is offline
Intermediate
Join Date: Apr 2016
Location: Western Washington
Posts: 39
Received 28 Likes on 13 Posts
Default

Thanks that was kinda the approach I was taking, finally got it on but noticed about 1/8 gap around the vent. Snug and tight everywhere else. Patience was used up �� Might try again tomorrow. Gonna take a ride but the BT systems rocks in the garage
 
  #144  
Old 05-08-2016, 11:14 PM
Tailwind's Avatar
Tailwind
Tailwind is offline
Ultimate HDF Member
Join Date: Mar 2015
Location: TEXAS
Posts: 6,446
Likes: 0
Received 873 Likes on 741 Posts
Default

Originally Posted by Warchild1$
Thanks that was kinda the approach I was taking, finally got it on but noticed about 1/8 gap around the vent. Snug and tight everywhere else. Patience was used up �� Might try again tomorrow. Gonna take a ride but the BT systems rocks in the garage
Brotha, pop your head light out and get to know whats going on under the hood. Would bet u have a bunch of wires bunched up in one area that u thought would be pretty roomy. Do a dry run hood install and stick ur unused had in the headlight opening and one sweep will paint u a real clear picture about some minor wiring shifts. Adjust the wiring bundles a tad, red insert the headlight then put the fairing back on.
U don't want to jam that fairing on, pinching RCAs, harnesses, wire bundles, etc.... It's popping out of the bottom clips cause it's high-centering on your recent additions.
Been there done that Brotha. Take the time to get a lay of the new land under there.

T.
 
The following 2 users liked this post by Tailwind:
indiggio (05-09-2016), Warchild1$ (05-09-2016)
  #145  
Old 05-09-2016, 01:19 AM
Warchild1$'s Avatar
Warchild1$
Warchild1$ is offline
Intermediate
Join Date: Apr 2016
Location: Western Washington
Posts: 39
Received 28 Likes on 13 Posts
Default

Thanks for sure it's coming off again, I hate having others work on my ride cause I want it done right. I have a 4000 mile ride planned in June/July so I have to have it right. Just ran out of patience today. It's so close to perfect now but that little gap is driving me crazy
 
  #146  
Old 05-09-2016, 06:48 AM
indiggio's Avatar
indiggio
indiggio is offline
Cruiser
Join Date: May 2015
Location: Pennsylvania
Posts: 101
Received 6 Likes on 5 Posts
Default

Anyone know what that cloth-like wrap they use to bundle various wires?
Is there any preferred stuff that people have found that works well?

Thanks!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dsm Limited
Audio Systems
14
05-29-2017 09:22 PM
RHD
Audio Systems
19
05-12-2016 07:53 AM
SunDevil01
Audio Systems
6
03-12-2016 07:22 AM
iclick
Touring Models
27
04-15-2014 03:46 PM
14FLHXS
Touring Models
13
01-29-2014 07:19 PM



Quick Reply: 2014 FLHTK Bike Tronics install for a newbie.



All times are GMT -5. The time now is 04:29 AM.