Audio Systems Find answers to all of your stereo, speaker and other audio technology questions here.
Sponsored by:
Sponsored by:

Parts for Infinity Kappa/RF PBR300x2 Install on 2014+ Street Glide

Thread Tools
 
Search this Thread
 
  #31  
Old 05-20-2015, 07:39 AM
TexasMotorcycleRider's Avatar
TexasMotorcycleRider
TexasMotorcycleRider is offline
Grand HDF Member
Thread Starter
Join Date: Apr 2014
Location: Spring, TX
Posts: 3,882
Received 670 Likes on 446 Posts
Default

Originally Posted by 2014streetglide
Lol that's why I was asking if you'd to a write up and some pics for the rest of us. I can't find any install instructions for 2014 and up bikes.
I am planning on tackliing this tonight that way if there is issues I have a chance to order parts before the weekend.
 
  #32  
Old 05-20-2015, 05:43 PM
2014streetglide's Avatar
2014streetglide
2014streetglide is offline
Road Captain
Join Date: May 2010
Location: WV
Posts: 661
Received 8 Likes on 7 Posts
Default

Sounds good. Good luck and give us an update!
 
  #33  
Old 05-20-2015, 10:15 PM
TexasMotorcycleRider's Avatar
TexasMotorcycleRider
TexasMotorcycleRider is offline
Grand HDF Member
Thread Starter
Join Date: Apr 2014
Location: Spring, TX
Posts: 3,882
Received 670 Likes on 446 Posts
Default

Originally Posted by 2014streetglide
Sounds good. Good luck and give us an update!
Ok, Cycle Sounds grills DO NOT work with Kappa 62.11i. I am calling CS tomorrow and make sure they sent the correct ones. The tweeters hit, if the grill was not concave it would have worked.
 
  #34  
Old 05-20-2015, 10:20 PM
HogPilot54's Avatar
HogPilot54
HogPilot54 is offline
Tourer
Join Date: Apr 2015
Location: Ridgecrest, CA
Posts: 361
Received 32 Likes on 23 Posts
Default

Originally Posted by Rocket67
Ok, Cycle Sounds grills DO NOT work with Kappa 62.11i. I am calling CS tomorrow and make sure they sent the correct ones. The tweeters hit, if the grill was not concave it would have worked.

Oh crap. I just recieved my CS grills today and was planning on installing the 62.11i's tomorrow. Please let us know what you find out.
 
  #35  
Old 05-20-2015, 10:41 PM
Racin929's Avatar
Racin929
Racin929 is offline
Road Captain
Join Date: Oct 2011
Location: Northern,CA
Posts: 714
Received 21 Likes on 15 Posts
Default

They must be the wrong ones. I have mine on right now. Now clearance issues. Bummer man.
Did they change the CS design? Still the ones with the red dot right?
 
  #36  
Old 05-20-2015, 10:49 PM
TexasMotorcycleRider's Avatar
TexasMotorcycleRider
TexasMotorcycleRider is offline
Grand HDF Member
Thread Starter
Join Date: Apr 2014
Location: Spring, TX
Posts: 3,882
Received 670 Likes on 446 Posts
Default

I ended up going to the hardware store and getting longer screws for the speakers. I don't have a part number, just took the stock ones and matched diameter and about 1/4" longer.

Since I don't have speaker grills I just connected the pods with the three allen bolts to check fit otherwise. The surround does touch barely on the top a bit. I haven't connected the smp yet but tried them with the radio. I was able to crank the volume to max and they never distorted.

About the pods.......there is one bolt that is nearly impossible to get off. Its on the inside of a metal plate near the center of the fairing connected to the bottom of the pod. The bolts point left or right depending on which pod you are looking at. Be prepared to be creative because they are in really tight and hard to get to. You can see two of them but one you have to really look for it. Good thing is, once you break it you can get it off with your fingers. I am considering not putting it back.

So, amp wires are run and last thing to do is wire up the speaker harness to the amp plug. After that I can test the system out and wait for replacement grills.
 
  #37  
Old 05-20-2015, 10:54 PM
TexasMotorcycleRider's Avatar
TexasMotorcycleRider
TexasMotorcycleRider is offline
Grand HDF Member
Thread Starter
Join Date: Apr 2014
Location: Spring, TX
Posts: 3,882
Received 670 Likes on 446 Posts
Default

Originally Posted by Racin929
They must be the wrong ones. I have mine on right now. Now clearance issues. Bummer man.
Did they change the CS design? Still the ones with the red dot right?
These are the ones they sent.
 
Attached Thumbnails Parts for Infinity Kappa/RF PBR300x2 Install on 2014+ Street Glide-0520152252a.jpg   Parts for Infinity Kappa/RF PBR300x2 Install on 2014+ Street Glide-0520152252.jpg  
  #38  
Old 05-20-2015, 11:05 PM
TexasMotorcycleRider's Avatar
TexasMotorcycleRider
TexasMotorcycleRider is offline
Grand HDF Member
Thread Starter
Join Date: Apr 2014
Location: Spring, TX
Posts: 3,882
Received 670 Likes on 446 Posts
Default

Originally Posted by Rocket67
These are the ones they sent.
From the website:
"With these grills there is no restrictions on speaker choice as the grills are recessed to accomodate speakers with tweeters that stick out further than the speaker basket mounting holes. "

http://www.cyclesounds.com/metal-spe...15-harley.html
 
  #39  
Old 05-20-2015, 11:57 PM
Racin929's Avatar
Racin929
Racin929 is offline
Road Captain
Join Date: Oct 2011
Location: Northern,CA
Posts: 714
Received 21 Likes on 15 Posts
Default

Dude. those are the ones I have too. I just dont, (or didnt) have any issues. I got rid of the Kappas and got Focals. Still, no issues.
 
  #40  
Old 05-21-2015, 12:04 AM
HogPilot54's Avatar
HogPilot54
HogPilot54 is offline
Tourer
Join Date: Apr 2015
Location: Ridgecrest, CA
Posts: 361
Received 32 Likes on 23 Posts
Default

So... I'm confused... will these CS grills work with the 62.11i's or not. One guy say's yes, one say's no. I'm installing these speakers and grills tomorrow! Would like to know for sure before I rip my bike apart. Not really interesting in running without grills. Even less interested in removing those damn pods twice!
 


Quick Reply: Parts for Infinity Kappa/RF PBR300x2 Install on 2014+ Street Glide



All times are GMT -5. The time now is 01:34 AM.