2014+' radio flash for aftermarket setups: donation thread
#221
Yes the off and on is engine off and on. Some of the bin files have different bin for off and on. 00_off_.bin has different bin files for off and on. 135 is the same off or on.
00_off.bin FLHT_ENGOFF_EQ_4SPKR_111412_REVLG.EQF
00_on.bin FLHT_ENGON_111312_REVLG.EQF
135_off.bin HU 4ch active revle DK 041013.EQF
135_on.bin HU 4ch active revle DK 041013.EQF
00_off.bin FLHT_ENGOFF_EQ_4SPKR_111412_REVLG.EQF
00_on.bin FLHT_ENGON_111312_REVLG.EQF
135_off.bin HU 4ch active revle DK 041013.EQF
135_on.bin HU 4ch active revle DK 041013.EQF
#222
Went to the dealer today and had three different flashes 135.off is the one that was best also check this out bluetooth equalizer that you can stream straight to and bypass headunit and has 7 band equalizer all from your phone just ordered from ebay. http://www.dualav.com/marineaudio/meq15bt.php
Thanks.
#224
My local dealer will not do flashes. Dicks. Even told me they don't have the equipment to do them. Then said there is no flash or anything like that available. So basically they wanna sell the boom ****. So what are my options? I've heard people not liking the magic boxes. How about some other type of oem integration?
#225
My local dealer will not do flashes. Dicks. Even told me they don't have the equipment to do them. Then said there is no flash or anything like that available. So basically they wanna sell the boom ****. So what are my options? I've heard people not liking the magic boxes. How about some other type of oem integration?
I am pretty sure they have the equipment, you have to use to flash for boom, so they flat out lied to you twice.(that you know of)
#227
Sorry haven't been on here in a while. Go to the very first one of this thread it explains how to get 135_off
#229
How deep is the 6.5 radio? I think this is the the shallowest double din out there.
Dimensions (inches): 7 X 3.93 X 4.49
Dimensions (inches): 7 X 3.93 X 4.49
#230
Under speakers tab. Select drop down box and select 2 amps. Then check box by 2 amps and 8 speakers.
Next select options tab. Check amp1 installed and check amp2 installed.
After flash turn off bike. Hold power button on head unit turn ignition on keep holding till disclaimer screen comes up press accept then release power button. Select audio and check to see if 135_off.bin is highlighted if it is your good if not tech did something wrong try again. Print this and hand to harley tech
Next select options tab. Check amp1 installed and check amp2 installed.
After flash turn off bike. Hold power button on head unit turn ignition on keep holding till disclaimer screen comes up press accept then release power button. Select audio and check to see if 135_off.bin is highlighted if it is your good if not tech did something wrong try again. Print this and hand to harley tech
Last edited by Alfster; 07-11-2015 at 07:29 AM.