SoundzCustomz Level 4 w/ lids - video after install
#1
SoundzCustomz Level 4 w/ lids - video after install
I cannot believe the clarity and performance of this system! I had it down at HD today next to a Boom II and I blew it away and I'm not even past the break-in yet....
Big Thanks to Peter Jensen of SoundzCustomz for putting together an awesome system!
Here's my video.... incredible!
EDIT:
I wanted to put this here in case people were curious ( other flash threads are out there as well ).... RECOMMENDED FLASH for me was 2 amp ON and 8 speaker ON... This resulted in a binfile of 135_OFF ( FADER inactive ) I use the front speaker outputs of the factory HU to split to front and rear inputs of the amp... no need for a fader.
Second video AFTER break-in
Big Thanks to Peter Jensen of SoundzCustomz for putting together an awesome system!
Here's my video.... incredible!
EDIT:
I wanted to put this here in case people were curious ( other flash threads are out there as well ).... RECOMMENDED FLASH for me was 2 amp ON and 8 speaker ON... This resulted in a binfile of 135_OFF ( FADER inactive ) I use the front speaker outputs of the factory HU to split to front and rear inputs of the amp... no need for a fader.
Second video AFTER break-in
Last edited by Spazz; 05-09-2015 at 08:20 AM.
#2
#3
#7
Hats off to your bad *** system.... Did you have the head unit flashed or did you use a magic box? how did you run the 4 channel amp setup with 2 sets of rca outputs? I have a 2014 SGS as well and ive got the polk mm651's in the fairing in the pods with lots of polyfill and the speakers are seeing roughly 140 watts each. I am awaiting my bag lids so I can add them to my other 2 channels on the amp, sweet setup!!!!!
Trending Topics
#8
Hats off to your bad *** system.... Did you have the head unit flashed or did you use a magic box? how did you run the 4 channel amp setup with 2 sets of rca outputs? I have a 2014 SGS as well and ive got the polk mm651's in the fairing in the pods with lots of polyfill and the speakers are seeing roughly 140 watts each. I am awaiting my bag lids so I can add them to my other 2 channels on the amp, sweet setup!!!!!
I had the configuration done for 2 channel input and split with RCA's to the rear....no fade control... but I didn't need it anyway....
#10