Shotgun Install and Other Chrome
#1
Shotgun Install and Other Chrome
Well I finally started on the Shotgun install this week. Had a friend come over from out of town for a few days and we had a great time wrenching, drinking, riding and living.
Here is the start....
Got the back wheel off and out of the way, rear caliper off and the swingarm off.
Here is the shotgun being mounted. Notice the front mounting is the new style. I sent Shotgun my ebay bought unit and he modified it for FREE AND FREE SHIPPING. He also swapped in the larger compressor for NO COST. Let me tell you, this compressor will shoot the back up in 2-3 seconds. More on Shotgun below...
Putting it back together with a chrome swingarm, chrome rear caliper and shotgun. Also added a new Monster spoke rear wheel with matching pulley and calipers. Put a 150 Avon on the rear to fill out the fender nicely.
Still a long way from being done. I broke a pin on the switch harness and I emailed shotgun today and JD replied within an hour. He is sending me spare pins and an extra connector AT NO CHARGE. I am telling you...this guy personally anwers emails and goes above and beyond on customer service despite the rhetoric you have heard.
I still need to put the rear pipe on the bike, lower the frint end, change out the front caliper, put new 21 front wheel on, and finish adding all the new chrome goodies. So far I am very pleased.
Here is the start....
Got the back wheel off and out of the way, rear caliper off and the swingarm off.
Here is the shotgun being mounted. Notice the front mounting is the new style. I sent Shotgun my ebay bought unit and he modified it for FREE AND FREE SHIPPING. He also swapped in the larger compressor for NO COST. Let me tell you, this compressor will shoot the back up in 2-3 seconds. More on Shotgun below...
Putting it back together with a chrome swingarm, chrome rear caliper and shotgun. Also added a new Monster spoke rear wheel with matching pulley and calipers. Put a 150 Avon on the rear to fill out the fender nicely.
Still a long way from being done. I broke a pin on the switch harness and I emailed shotgun today and JD replied within an hour. He is sending me spare pins and an extra connector AT NO CHARGE. I am telling you...this guy personally anwers emails and goes above and beyond on customer service despite the rhetoric you have heard.
I still need to put the rear pipe on the bike, lower the frint end, change out the front caliper, put new 21 front wheel on, and finish adding all the new chrome goodies. So far I am very pleased.
#2
#6
I could not be more impressed with JD. IMHO, he has gone above and beyond for me and I told him so. I offered to pay for the mounting modification. I also offered to pay for the pins and shipping. It was my carelessness during the intstall that broke the pin. But he would not take any payment...not even for shipping. He has been in the bike scene a long time and I have nothing but respect for him and his designs.
#7
Trending Topics
#8
Looking good there. Once I install my "inferior" 2 shock system we need to get together and have a good old fashioned air ride Pepsi challenge. That is if you can ride a bike with a foot clutch and tank shifter. I am really curious as to whether one performs better than the other between shotgun and Platinum.
#9
The Heritage in the background is my buddys from the St. Louis area. He brought it with him for the visit so we could do some riding. My Ultra is just left of his bike. That is one b@d @ss Heritage he has.
Yeah, a couple years ago I decided to clean up the garage and get organized. I got tired of buying stuff I already had but couldn't find it...lol. Then I decided to add the race deck floor. Its really nice to work on.
It was a lot of fun having someone to wrench and with. A couple extra hands sure made the job easier. Wifey is at the beach so we got to raise a little h#ll and cut loose a little .