UNextending Kury forward controls
#1
UNextending Kury forward controls
Ok, '99 FXDX. Right now, I have Kuryakyn Iso 2 or 3" extended forward controls on my bike. (Previous owner had long legs.) All I need to do is either A. Pull the forwards back to standard forward control position or B. Put mid controls back on. (The shaft for the mids is still inside the primary and has the chrome **** where they used to be.) Either way is fine with me, but I think I would prefer the forwards. Kury says for the price of moving them back, I could just buy a standard set of forwards for about a $20 difference. I can't help but think that it would benefit them much more if I bought another set. lol. Looking at the controls, it seems that an extension plate, different shift linkage, and brake rod are the only things that Extend the controls. The controls mount to the plate the same as they would to the frame, as far as I can tell. Is all I need to move them back the linkage and rod? What length do I need? Part number? Where?? If this is not as easy as I'm thinking it is, what all do I need to switch back to a mid setup? I've seen the black street bob mids on eBay for $80, would this fit my bike? Do I just need pegs with the eBay kits? Any info would help! Thanks ya'll.
#2
#3
#4
#5
#6
#7
I just installed the extensions on mine and it is that easy. If you send him the plates, clutch rod, and brake rod and he sends you the clutch and brake rods then you guys will be set. Make sure to send all the hardware, connecting pins and cotter pins and screws.
Trending Topics
#8
Here's what I got...
Below is what I'm wanting to add if this is what you have... Kuryakyn 3" Forward Controls Extensions.
Also seen here: http://www.kuryakyn.com/index.cfm/go...ID/23/IMID/230
Below is what I'm wanting to add if this is what you have... Kuryakyn 3" Forward Controls Extensions.
Also seen here: http://www.kuryakyn.com/index.cfm/go...ID/23/IMID/230
Last edited by thomaskray; 07-07-2009 at 07:29 PM.
#10