Skid Plate for RG/SG
#41
The following 11 users liked this post by BrandonSmith:
bill from tn (07-04-2024),
Casper (07-17-2024),
Cornel (07-08-2024),
Erratikmind (07-04-2024),
Gizmo83 (07-15-2024),
and 6 others liked this post.
#42
The following users liked this post:
Erratikmind (07-05-2024)
#43
The following users liked this post:
BrandonSmith (07-11-2024)
#46
I installed the Thrashin Supply skid plate today and made an installation video. I started a YouTube channel. Subscribe if you’d like. I’ll just start recording install and maintenance videos, not anything else.
https://youtu.be/8weTv-wyPJU?si=qpFEWwiSbtLbIf5k
https://youtu.be/8weTv-wyPJU?si=qpFEWwiSbtLbIf5k
The following users liked this post:
BrandonSmith (07-13-2024)
#47
Originally Posted by South Jersey Dave;[url=tel:21741150
21741150[/url]]Your videos are some of the best I've ever seen. Very detailed and thorough. You have yourself a happy new subscriber!
In my job I write, well, mostly supervise the writing of maintenance procedures, so it’s a part of my background.
I enjoy making the videos, but I enjoy walking through the process even more. Things I’ve already installed, I’m removing and and reinstalling so I can make more videos. Maybe a company will sponsor me at some point and I can install some more things without oissing the wife off that I’m spending too much LOL
The following 2 users liked this post by BrandonSmith:
RBowers (07-14-2024),
South Jersey Dave (07-14-2024)
#48
I got my skid plate... sanded with 120 grit sandpaper in a manual random manor. Cleaned and cleaned again for a final time with alcohol. I then sprayed with "truck bed spray liner". About three coats. I am sure it will not be near as good as "real bed liner". Looking from up top will look OK!. Time will tell, hope to install tomorrow
.
.
The following 2 users liked this post by ngshop:
bradsULtd (07-18-2024),
BrandonSmith (07-17-2024)
#49
#50
The following 6 users liked this post by ngshop:
Andrea_73 (07-18-2024),
bill from tn (07-18-2024),
bradsULtd (07-18-2024),
BrandonSmith (07-18-2024),
Erratikmind (07-18-2024),
and 1 others liked this post.