2022 lowrider s 6.5 thrashin risers with pull back
#1
2022 lowrider s 6.5 thrashin risers with pull back
Just installed my thrashin 6.5 risers with 1.5inch pull back used stock cables and wires had to adjust brake line to make work but works with stock front brake line and stock clutch cable just have to route the clutch cable out of triple tree…. Used a big Al’s mount relocation gauge bracket.
The following 5 users liked this post by Hellgoblin:
GrenV (02-14-2023),
jeffusvon (07-22-2022),
Klock20 (07-19-2022),
RGS88 (02-10-2023),
vinhnumber (10-18-2022)
#2
The following users liked this post:
Hellgoblin (08-16-2022)
#3
slightly but not crazy i installed arlenness polyurethane riser bushings too…. I did however notice that when i go over bumps now i feel more noticeably in my arms since they are more up in air already…. But they are super comfortable and perfect for my height I’m 5’6 with short reach so 6.5 sit just right for me with the pull back.
#4
#5
#7
I'm thinking of doing the same setup I already have the drag risers so it wouldn't be much out of pocket other then the 600 bucks i spent on the Billet ones they are cool and look good but if my hands feel like they are going to fall off within 15 min of riding they are useless imo. Your sticker is awesome btw...
The following users liked this post:
Hellgoblin (08-16-2022)
Trending Topics
#8
I'm thinking of doing the same setup I already have the drag risers so it wouldn't be much out of pocket other then the 600 bucks i spent on the Billet ones they are cool and look good but if my hands feel like they are going to fall off within 15 min of riding they are useless imo. Your sticker is awesome btw...
The following 2 users liked this post by Durham man:
Hellgoblin (08-16-2022),
Klock20 (07-19-2022)
#9
Just installed my thrashin 6.5 risers with 1.5inch pull back used stock cables and wires had to adjust brake line to make work but works with stock front brake line and stock clutch cable just have to route the clutch cable out of triple tree…. Used a big Al’s mount relocation gauge bracket.
#10
Just installed my thrashin 6.5 risers with 1.5inch pull back used stock cables and wires had to adjust brake line to make work but works with stock front brake line and stock clutch cable just have to route the clutch cable out of triple tree…. Used a big Al’s mount relocation gauge bracket.