thanks for posting this. I went with the same set up and all worked well.. Just wanted to thank you for posting since i never believe the sales websites. Hearing from fellow rider and wrench turner is worth its weight in gold. Thanks again for making my life easier and a little less stressful
I did the LA choppers Billet 6" pullbacks with Guage mount and they vibrate bad between 2600 and 3000 so basically cruising speed I had drag specialties 5.5" pullbacks on before and they didn't at all I do have sock bushings though.
my Arlen ness poly urethane bushings are fine i have a little slight vibration over stock but it’s barely more noticeable and very manageable.
What is that cover under the speedo housing over the warning light holes? Those holes are the reason I don't want to use single gauge cups that I've found online.
Just installed my thrashin 6.5 risers with 1.5inch pull back used stock cables and wires had to adjust brake line to make work but works with stock front brake line and stock clutch cable just have to route the clutch cable out of triple tree…. Used a big Al’s mount relocation gauge bracket.
Did you reuse your stock bars or used different brand. Do you know the part number for the gauge kit from Big Al?