Everything Low Rider ST Thread
#391
Originally Posted by NODYNA
At the risk of giving hard core LRST owners heart failure has anyone found a way to replace the stock foot pegs with Heritage floorboards?
The high pegs won't work for me and I don't think the forward controls are the answer either.
The high pegs won't work for me and I don't think the forward controls are the answer either.
#393
I recently did a 600 mile roundtrip from Vegas area to Phoenix. Roads are AZ are the worst I've seen in my 55 years -- they really let it go during the pandemic.
That said, my FXLRST did just fine for the 10 hours of driving. I was perfectly comfortable the entire time. Now to be clear, I put forwards on my bike immediately -- was just too cramped with the mids. I also sport a Saddleman seat which likely makes a huge difference.
That said, my FXLRST did just fine for the 10 hours of driving. I was perfectly comfortable the entire time. Now to be clear, I put forwards on my bike immediately -- was just too cramped with the mids. I also sport a Saddleman seat which likely makes a huge difference.
The following users liked this post:
johnnynitro (07-05-2023)
#395
The following 3 users liked this post by Cootey:
#396
Had the risers and engine guards installed. Bung King 6" risers 2" pull back. Dealer replaced clutch cable but the brake cable while tight was fine. Now when I ride my back is firmly against the backrest of my Mustang seat and steering if not just general riding is near perfect. Didn't realize how much I had been leaning forward with the other bars, for reference 5'8" 30" inseam. Replacing windscreen next using Clearview medium or large shield, probably large as I have the Harley large shield and it is not sufficient. Apparently actually riding in the proper position was enough to put me back in the airflow over the windscreen to where the turbulence is not comfortable
#397
#399
Happy new bike day for me!
Already installed:
Sundowner, Passenger pegs and backrest (carried over from my Sport Glide)
Layback plate mount
Coming soon:
Dominion Floorboard conversion (Also carried over from the Sport Glide), need a few parts to get the mids off.
Black levers (why, Harley?)
maybe slip-ons. see how the stockers bed in.
First bike I've had in a while that I can just ride. Floorboards are the only "must" due to the lack of a dysfunctional left foot.
Super happy, its a really great bike and a huge upgrade from the Sport Glide!!!
Already installed:
Sundowner, Passenger pegs and backrest (carried over from my Sport Glide)
Layback plate mount
Coming soon:
Dominion Floorboard conversion (Also carried over from the Sport Glide), need a few parts to get the mids off.
Black levers (why, Harley?)
maybe slip-ons. see how the stockers bed in.
First bike I've had in a while that I can just ride. Floorboards are the only "must" due to the lack of a dysfunctional left foot.
Super happy, its a really great bike and a huge upgrade from the Sport Glide!!!
The following 10 users liked this post by Cootey:
Big Al 59 (08-01-2023),
ChrisHo (08-01-2023),
Durham man (08-01-2023),
FLSSBart (09-29-2023),
JakeC7R (08-01-2023),
and 5 others liked this post.