FXBB wheel fitment help
#1
FXBB wheel fitment help
Hey I’ve been trying to get mag wheels for my fxbb. I’m buying a set of 13 spoke from a 19 sporty I’ve seen people make the conversions just wondering if anyone has tips or tricks to help. I found a spacer kit for the swap at tmf cycles but he’s had a few people tell him the rear caliper and disc don’t line up properly and some people never make complaints. Any information would be great especially about the fact the the rear wheel is gonna have to be flipped directionally
#2
I put sporster 9 spokes from a 2019 on my 18 fxbb and it took a little bit of engineering to get done. I bought my spacer from tracker/die. The front fit easy but the rear need spacers cut for the drive side. I also installed a chain kit during the process. Just be prepared to spend extra trying to find right spacers and for the sprocket also.
#3
I put sporster 9 spokes from a 2019 on my 18 fxbb and it took a little bit of engineering to get done. I bought my spacer from tracker/die. The front fit easy but the rear need spacers cut for the drive side. I also installed a chain kit during the process. Just be prepared to spend extra trying to find right spacers and for the sprocket also.
#4
I did not have a problem with the rear rotor or cailper, I believe i used the stock spacers on that side. The put 2 spacers together for the drive side and i dont remember the length. As for the belt sprocket im not sure because i switched to chain and that was pain to space that out also.
sorry if none of this helps. You will have to mock everything up and measure. But that kit from tmf cycles should be close
sorry if none of this helps. You will have to mock everything up and measure. But that kit from tmf cycles should be close
#5
I did not have a problem with the rear rotor or cailper, I believe i used the stock spacers on that side. The put 2 spacers together for the drive side and i dont remember the length. As for the belt sprocket im not sure because i switched to chain and that was pain to space that out also.
sorry if none of this helps. You will have to mock everything up and measure. But that kit from tmf cycles should be close
sorry if none of this helps. You will have to mock everything up and measure. But that kit from tmf cycles should be close
#7
Trending Topics
#8
#9
The following 2 users liked this post by BobbedOutFXBB2020:
FenderBndr (01-13-2022),
KaiserGB (01-10-2022)