USB Port Access on LowRider S
#12
My Deluxe was that way from the factory, I bent the hard line up a bit till I took it in for its Stage one which took a month to get scheduled, heck it did the 1k myself before they could get me in to have the stuff I paid for when I bought the bike installed, and they were offended that I didnt take it to them for the 1ki, I said "your kidding right? it took 38 days from date of delivery to get an appointment for a stage 1 and saddlebags, how much longer if I waited for you for the 1k...."
#14
My '19 Deluxe did not have that obstacle. You can see pics in my mod thread where I found cables and covers: https://www.hdforums.com/forum/2018-...cable-mod.html
Good Luck,
-PH
Good Luck,
-PH
#15
My '19 Deluxe did not have that obstacle. You can see pics in my mod thread where I found cables and covers: https://www.hdforums.com/forum/2018-...cable-mod.html
Good Luck,
-PH
Good Luck,
-PH
#16
Your Slim probably doesn’t have ABS. Those lines are the lines running from the front brake line to and from the ABS module under the seat. My Heritage has those lines but they run just above the USB port cover on my bike.
#18
The following users liked this post:
bmedeiros678 (11-02-2021)
#19
In a lot of cases changing handlebars includes moving those brake lines to access the wiring harness in the frame behind the rubber boot, see my picture.
If the USB port is blocked this way from the factory by mistake or the brake lines were not replaced correctly after a handlebar change seems to be two real possibilities.
Thread
Thread Starter
Forum
Replies
Last Post
Pixiechitos
Sportster Models
32
05-20-2015 12:12 PM