Lotta good bikes on here and this thread kinda died so doing some CPR to it.
Where it's at




now from a few post up when I got it.
HD Fairing w/ Denton 12" shield
Bung King 11.5" Risers, Thrashin High Bend bars, Biltwell grips, Lucky Speed Shop levers,
Crossthread Cycles brake and shift arms
Thrashin Supply pegs front and rear with toe pegs
Ness A/C
Woods 22XD cam, lifters, Fuel Moto pushrods, S&S tappet cuffs
Powervision w/ Fuel Moto tune
Thunderheader
Moons MC integrated taillight
C&C Fastback seat
Big Als gauge bracket
Random ARP hardware

Not sure where I'll go from here, just need to ride it more this year. Had it 10 months now and just crossed 1k miles.

 

Haven't posted in a while. Thought I'd upload a few pics of my 22.

 

i will add to it this weekend some time, ben swapping parts and for now, the exhaust is the last big piece till i research more.

new pipe should arrive today, but i just did a set of forward controls earlier this week...for me, it feels 100 time better.

 

shiftace,

what seat is that ? is any deeper than stock or have any addition reach ?

i am anting LOWER, FURTHER REACH and have a slightly higher back rest...YET, look inline with the fender shape...

yours has been the best appearing yet, or you just nailed the angles in the pics

 

What bars are those? I want to put drag bars with pull-backs on my '22 LRS.

 

I believe those are the stock bars that come on the Dyna Lrs.

 

Doh... It's a Dyna. Should have had my glasses on. But, would they fit a Softail LRS? Are the triple clamps the same and does the wiring go through the bars as it does with the Softail? They look great. Much better than the stock bars on the LRS and with pullbacks would improve the riding position.

 

i think the dyna bars were 1.25” were as the m8’s are 1”. I think. Probably doable but you have the gauge to deal with. My LA choppers riser extension’s are 1.25”. So if I remember right you are running the tall boy seat? With the straight 4 “ risers you must really be reaching. I disagree as far as looks compare between the 2 bars. I run the stock bar with 6.5 pull back risers with the tall boy seat and could not be happier.

 

Bike is a 22 in gray
S&S Pump/Plate/Lifters/Pushrods/Tensioner
Koyo full complement inner cam bearing
Star Racing F35A & Moonshine Horsepower/Star Racing valve spring kit
5.5 gps injectors
Thunderheader
Thrashin 7.5" pullback
Saddlemen T&R Step-Up
Moons lighting/integrated taillight
LeatherPros full-sized bags
RWD RS-1 Shock (installing soon)
Tuned by Matt Sowder in Bristol, CT

 

he is next to yankee Harley?