Looks like you have the SE Heavy Breather Elite on your FXLRS. Is that plug-in-play? On the website it doesn't say it fits 18+ softails.
Its actually the M8 Heavy Breather (which I modded to vent externally to the little filter just under it) with the Twin Cam HB Elite element. I had to buy the TC element separately. Jamie at FuelMoto once said their testing showed the M8 filter wasn't big flowing enough for heavily modified motors. I'm not quite there with only my measly cam and exhaust, so I really just did it for the looks...
Added 5.5" pullback risers, Drag Specialty #0602-0415. Using the stock handlebar I'd say this is as far as the stock wires will stretch. Still had to change the upper clutch cable for a +2" Harley 37200218, found it on eBay, will be here tomorrow. For me with a 33" reach it's going to help reaching the bars and still not too tall for the stock fairing.
I do have a plan for the hole in the console, ordered a can of wrinkle black paint to get that mod started.
Mike,
Have you considered moving both to the top clamp of your risers and replacing the stock console with the one off the blackline?
Mike,
Have you considered moving both to the top clamp of your risers and replacing the stock console with the one off the blackline?
Yes, I saw that mod, prefer to keep the Low Rider look with a console. I'm cutting a disc to paint to fill the vacant console spot this weekend.
I have a spare filler piece for the rear of the mini fairing if I want to move the tach back to stock also.
04-10-2020, 09:33 AM
