2020 Low Rider S owners
#901
Thats strange. I used the stock clutch cable with my 10” t-bars. I did have to pull it from the center hole in the tree and run it straight up the left frame rail, but I don’t get why you’d need a longer cable with only 5.5” risers. Unless they changed it, but I can’t see why. Weird.
#902
#903
The stock cable is close to fitting the way I want, through the tree and I can probably find another solution/routing, but since the eBay tale-off was handy and I scheduled this mod for the weather down days, this is where I'm at.
I already gave myself a haircut today so just playing with the bike
The following users liked this post:
Mchad (04-09-2020)
#904
Recommendations on riser height
2020 LRS, I am 5' 11" tall looking for recommendations on the right height riser to get. What my hands to be just slightly below shoulder level. Think I should get 8" or 10" risers, since the stock risers are 4" and my bars have about 3" rise from riser to grips. Don't want my hands above my shoulders. Any suggestions on proper rise height? Also, any recommendations on quality risers without breaking the bank? Thanks...
#905
The following users liked this post:
StreetGlide18 (04-09-2020)
#907
2020 LRS, I am 5' 11" tall looking for recommendations on the right height riser to get. What my hands to be just slightly below shoulder level. Think I should get 8" or 10" risers, since the stock risers are 4" and my bars have about 3" rise from riser to grips. Don't want my hands above my shoulders. Any suggestions on proper rise height? Also, any recommendations on quality risers without breaking the bank? Thanks...
#909
#910
Stock riser is a straight 4" rise. I just added a 5.5" riser that has approx 1.5" pullback. When I lay a ruler across the top of the bars and measure to the top of the tree, it is approx 10".
I lay a ruler across, at the center of the switch housing (which is where your hands actually grip the bars) at center of grips, I get 9.5" with the pullback riser I just installed.
You can see the shape of the stock bar #14 below.
The following users liked this post:
Lorecapo (04-10-2020)