2020 Low Rider S owners
#421
Last edited by Windycityblues; 11-08-2019 at 11:20 AM.
The following users liked this post:
EVIL21 (11-08-2019)
#422
The following 3 users liked this post by 24v:
#423
#424
#426
#427
#429
Need help
I took my forks off to send down to Howard Messner @ MotorcycleMetal.com so he can install a set of Ohlins 30mm cartridges. But like an idiot, I forgot to measure the height of the tube above the top triple.
So I need a favor. Can someone with a Low Rider S measure the length of the fork tubes that are exposed, from the top triple to top of the actual tube, not including the cap. Just the length of he tube itself at the front edge of the tube? Since the Ohlins cap is different then the stock cap, measuring the tube itself is the only accurate measurement.
This is my road king, obviously different, but you get the idea. I need this, in mm if possible: Thanks!
So I need a favor. Can someone with a Low Rider S measure the length of the fork tubes that are exposed, from the top triple to top of the actual tube, not including the cap. Just the length of he tube itself at the front edge of the tube? Since the Ohlins cap is different then the stock cap, measuring the tube itself is the only accurate measurement.
This is my road king, obviously different, but you get the idea. I need this, in mm if possible: Thanks!