Not sure if anyone has tried or installed forward controls. But according to my local HD shop. The FXLR forward controls will not work. I'm call BS but not 100% isn't the new FXLR and FXLR the same bike??
They’re telling you that because their parts book doesn’t specifically list it as fitting and the books and website are still screwy last time I checked. Still had fat bob seats saying will work etc. Short story long, yes, they will fit fine don’t listen to them.
Last edited by Windycityblues; 11-08-2019 at 11:20 AM.
Does the left side primary case stick out as far as the Dyna one does? I have a 2017 LRS and I’m gonna take my 2019 Iron 1200 and trade it in for a 2020. I haven’t had a chance to see one in person but it seems to look thinner then the Dyna.
For those of you running the new HD fairing, keep an eye on the mounts.
Thanks man. This is really just an interim solution (for me) until Memphis shades makes a bracket for their Cafe Fairing. I really prefer them. Hopefully it endures...
I took my forks off to send down to Howard Messner @ MotorcycleMetal.com so he can install a set of Ohlins 30mm cartridges. But like an idiot, I forgot to measure the height of the tube above the top triple.
So I need a favor. Can someone with a Low Rider S measure the length of the fork tubes that are exposed, from the top triple to top of the actual tube, not including the cap. Just the length of he tube itself at the front edge of the tube? Since the Ohlins cap is different then the stock cap, measuring the tube itself is the only accurate measurement.
This is my road king, obviously different, but you get the idea. I need this, in mm if possible: Thanks!
11-08-2019, 10:48 AM
