Well I’m gonna just call the dash good for now, other than some stainless hardware. Kinda tired of playing with it for the time being. Trimmed as small as I could comfortably go without fear of the gauges bouncing around with every bump, different brand of rattle can gloss black, and a cheapo emblem I found at the clearance table at the dealer. Grand total after the emblem and another can of rattle can is still under $20.
Nice! Man I really wish Saddlemen would make that seat in 1-up config. I like more fender showing and couldn’t give two poops about 2-up on this bike, ever.
I’ll probably go full custom here at Bitchin Stitchin in Denver.
Nice! Man I really wish Saddlemen would make that seat in 1-up config. I like more fender showing and couldn’t give two poops about 2-up on this bike, ever.
I’ll probably go full custom here at Bitchin Stitchin in Denver.
I feel ya. But with as high of a wall as these seats have, I feel like it would look silly as a solo seat. It's so much better than the stock seat too. It really locks you into the bike, giving you an even more "in the bike" feeling. With the stock seat you can slide around when riding more aggressively, but that is not a problem at all with this seat.
what did you end up going with for extensions on cables and wires? I have 11” risers ordered!
I have 14" bars and will be using this stuff... 69200034 is 10" switch pack extensions
For the TBW I got an extension from Guerilla because thye have 9". HD only lists 16", but if you want to go with that it is 69201804
For the brake line I got 41800810
For the clutch 37200383
If you want to keep the turn signals on the bars then you need...
69201795 is 8" turn signal extensions
10-02-2019, 12:18 PM
